Enjoy the fun of DIY from Micar Iron-on Heat Transfer Vinyl for T-Shirts 12 inches x 10 Feet RollApplication Instruction1. Design your desired pattern and reverse it before cutting2. Cut the mirror image (reversed image) on the adhesive layer (the dull side) into the cutting machine or by blade3. Weed the excess material 4. Spread out the target apparel and put the design on the desired position. 5. Heat and Transfer – press the iron or the heat is on the transparent polythene film(the bright side) of the design Home Iron: -Please Heat the iron on medium setting (302°F– 320°F)/ (150-160°C); -Press each section of the design with medium/firm pressure for 10-15 seconds; Heat Press： -Preheat garment for 2-3 seconds; -Apply design at 305℉; -Use medium pressure for 10-15 seconds; 6. Wait for 15-30 seconds for the vinyl to cool down, and then peel the transparent polythene film If necessary, repeat the steps above until you can peel off the polythene film without lifting up the vinyl. Warm reminders for long durability and successful DIY1.Make sure no wrinkles on the target area of the apparel. 2.COTTON, POLYESTER, COTTON / POLYESTER BLENDS materials are recommended, sweater and woolen sweater are not good for durability. 3.It will be better for you to do some experiment on some t-shirt you don’t want keep to get familiar with the item and the methods. 4. Do not use steam ironing, better to use a press cloth than direct contacting with PET film. 5. Please wait for at least 24 hours to wash your design, and wash inside out. 6. Standard machine wash available, avoid dry-cleaning and bleach, low tumble dry. Specifications: Product dimension: 12’’x 10’ Product weight: 300g/0.66 lb Package dimensions: 1.57*1.57*12.2 in Package weight: 350g/0.77 lb
M**O
Just as good as Cricut vinyl but much better price!
It’s just as good as Cricut vinyl or even better, but it’s a way better price. Very easy to work with and easy to weed. Also peals off the backing better and is very flexible.I’ve only used it on cloth and after pressing you can’t tell it’s there, it becomes part of the fabric. Highly recommend!
M**R
No complaints
Not bad to weed and adheres nicely. I use a heat press so you may have different results with a basic iron
B**G
Easy to Weed BUT not Sticky
I rarely write reviews but I felt I should write one on this product. I read many reviews on different vinyl and I found that this one had the best reviews so I purchased it.The vinyl cut easily and is easy to weed. However, the backing is not sticky at all!! It does not stick to the fabric that I am transferring the image on. I like for it to stick so I can make sure what I am applying is centered properly before putting it in my heat press. This does not stick at all!!! I found myself putting tape on it to hold it down and then removing the tape right before I heat pressed it.I will not be buying this vinyl again because of this reason. Had the paper been sticky this vinyl would be great.
J**
Decent
Thick material. Did a few T-shirt’s with this and it worked however, I had 3 separate instances where the material totally peeled off after 2 washes. I always wash and dry my vinyl shirts inside out and on low and I did nothing differently. I’m a little weary about buying another roll. I’m going to finish what I have left and decide.
A**N
Easy weeding
Used this for 36 drawstring backpacks. Had a few issues with detail work fusing to the fabric, but I was able to make it work. Overall it's good stuff. The more you work with it the easier it gets because you learn how it behaves. Also very easy to weed. That alone made it worth it.
G**
Perfect product perfect price
Honestly, I had no problems whatsoever cutting or weeding this htv. I tested it first with different settings just to check. I used the regular iron on setting and it cut perfectly. Weeded perfectly and easily. Backing isn’t sticky....but there’s only a couple major brands with sticky backing. It pressed perfectly and I’ve had no issues. I was in emergency need of HTV and needed same day. It came same day. The amount for the price I paid is unheard of. I’d order again in a heartbeat. As a matter of fact. I’m about to order again.
T**7
Great Vinyl!
Great vinyl. The vinyl was very easy to use and weed. I used this product to make several different shirts for my family. I used this product with my Cricut Explore Air. I would definitely buy again. When using product for Cricut make sure your blade is sharp and you have changed your settings to vinyl. The vinyl did a great job sticking and staying on the shirt. I have washed the shirt and the vinyl is in great condition. I make my vinyl shirts last longer by not putting them in the dryer.
K**N
Best!
Love this HTV! Easy to weed!
Trustpilot
2 months ago
1 week ago
