LASCO04-4104-MASTER Fill Valve Magnus Plastic Low Profile Anti-Syphon, 24-Pack, 24 Count

These are the best because they are by far the easiest to change when needed. They also offer a fast quiet fill and I have found them to last longer then the cheapest float type toilet fill valves which would be good enough but the best part no one seems to mention.When you install this type for the first time it is like any other valve, except perhaps it is easier to handle and adjust once installed. You know the routine, shut water, valve flush toilet, hold open flapper, sop up remaining fluid in tank. remove water line from valve, remove valve, get wet from water remaining in tank. Reverse for install connect the new hose and fill clip to the overflow. Adjust the fill level and dry the floor, change shirt.They seem to last me about 2-3 years.Here is the best part. When they start to go they will gradually not shut off completely, typical problem for a toilet valve. This causes the toilet to "run" . You can tell it is the valve and not the flapper causing the running since the water level is at the top of the overfill pipe.Now here is how to replace it the second time:Shut off the water valve. Flush toilet, hold open flapper to drain as much as will drain. Take the new valve of this same design. The top is held on by 3 stainless screws. remove screws, remove plastic top by lifting from the front. It will have the working components inside. Do the same for the old valve, WHILE IT IS STILL INSTALLED IN TOILET TANK. Now install the new top on the old bottom by hooking the rear in first and installing and snugging down the 3 screws.. INSTALL, the included, NEW HOSE & CLIP to toilet valve & overflow tube or you will get wet and or cause a leak. Turn on water valve. Adjust the water lever by turning the finger adjusting screw. Notice you did not need to remove the valve body from the tank. No need to lay on the floor under the toilet, no need to sop out the tank, Just remove and replace three screws. As quick and easy as can be. NOTE there are basically two models of this on the market. One has 3 screws holding the top on and the other has 2. I do not know if the tops are interchangeable between the 3 screw and the 2 screw models.Jay

This type of fill valve is the best! This is the same one I used to be able to find in our local hardware store. Well those are slowly slipping away and the big home supply stores don't carry them! I am glad to be able to find them online here so I bought an extra valve for the next time, which is inevitable!! Simple, fast and easy to install and you get rid of the clutter in your toilet tank! If you live in a older home, do yourself a favor and while you are replacing your fill valve, replace your copper water line going into the tank with a flexible braided supply line. It makes installation of this fill valve even simpler as you can throw away the other parts except for the lock nut!!

Fast ship on a hard to find item. Didn't think this valve was available anymore. But before taking off work I gave a quick look and to my surprise here's this old design part right next to traditional ball valve parts.The 1st one I bought came with a lifetime warranty. And when it died. I tried calling the number but they had gone out of business. Found the same design at the big box stores but with a different company name. They didn't warranty it. But it's such a simple design and the 1st one lasted a long time, I bought another one. Well I can only guess but I'd say the patent has expired and the design is up for grabs. This package say it comes with a 7 year guarantee. And so in 7 and 1/2 years. Ill be glad to buy another one. I think it's the clean design and simple install that impresses me. And I was very happy to spend an extra $2.99 for same-day delivery. Got home from work, removed the old valve and wasn't even done putting the tools away when it showed up at the door. Saved an hour driving to the big box stores and home again. Thanks Jeff B

I replace about 10 fillers per year. The float fillers (hidden float or not) are horrible. No guarantee is going to make me happy to replace the same filler every other year. I used to special order these from Ace, but now they doNot sell them at all. They work to well to be in stores.These fillers have a manner about them. The warm water of summer fills 3/4 of an inch higher than the cold water of winter. They fill so fast (a wonderful feature) that you must be careful during initial turn on or throw water out of the empty tank. The fillers which came from Ace would fill another 1/2 inch into the bowl after shut off before completely shutting off. These seem to have a solid shut off. Either way, after shut off listen carefully because if it is still running, it will fully shut off in about 15 minutes. No problem. After putting your hand in the water to adjust the hight, be sure to test again.I have a lot of experience with fillers like these. They work on day one and keep working, or they doNot work on day one which is ok by me because I can replace it right then. I love these kind of fillers because are fast, they work, and they keep working.I have searched long and hard for these fillers. This is now my new source for fillers. I will keep using these fillers and if I discover problems then I will modify this review. Buy three. These fillers are so great that if you did get one that didNot work, it is worth throwing away. I have yet to get a bad filler from this company, but if I discover a percentage of bad fillers, I will also let you know about that.

Amazing Improvement! So I just replaced both of my toilets which are identical and have the traditional fill valve.Then I replaced the fill valve in one of them with this Lasco valve.I am on well water with below average water pressure and still this Lasco valve fills my take in @ 31sec where the traditional valve in the toilet takes 1min 32sec to fill.

Worthless as tits on a boar hog!!! Can not be adjusted. I tried adjustments from least flow to max flow. You can get it to where you want the water level to be, but, then it seeps very slowly until it is running over the fill pipe. Would not recommend buying this at all.

Llego roto pero lo regrese y me reembolsaron

Kept as a spare. Unknown, but other one was fine. No problems.

Is working well no problems but the shipping was too long.

Arrived as expected. Hard to find item in store so it was a good bargain

wrks good