Tap Magic10004E W/EP-Xtra - 4 oz,

At work I am constantly chasing threads and tapping holes, heard about this product, and had to try it. I will say, it works VERY well. Try it and you will see. Highly recommend.

Outstanding!! Preserved drill bits sharpness and produced nice drill holes in short under. Also helped in drilling and tapping 8 drill holes in enclosed trailer frame to mount four stabilizers.The down side in using this cutting oil..as with any drilling/tapping/cutting fluid….it will smoke due to dissipating heat. But it’s what this fluid dies…keeps the heat down and allows drills/taps to do their function.Those metal flakes from drill bits are hot!! And it’s to be expected.I am impressed!

Good product

I've always used a competitors product, but this product I will stay with. Great results when drilling with not so sharp bits.

The fluid worked great for drilling out broken bolts and retapping the threads in the holes. But it would be easier to work with as a gel since most just drained off the bit or tap. (But I was working on a vertical surface which made run off more of a problem). But, it did help and it did work!

Used to drill and tap over 100 M8 x 1.25 holes in 3/8” 304 stainless steel. Used a carbide drill bit and a high speed tap in a drill press. Finished the job with the same tap and drill bit that I started with

I will not drill steel without this stuff now, the difference it makes is incredible. The only downside, is everything gets very oily, obviously. But I love this product.I also used it to cut up some 3/8" and 5/16" thick tool steel, and it seemed to help me get alot more life out of my bandsaw blade.

I used it to drill out a broken bolt in my engine.I broke and dulled about 7 drill bits. None broke once I used the oil.Thanks for a good price on a quality product.