ARCTIC MX-2 (4 g) - Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), high Thermal Conductivity, Safe Application, Non-Conductive, Non-capacitive

It worked pretty well on my Nintendo Switch. It spreads thinly and really closes in those gaps. As an idiot who didn't mount their cpu properly, it was really hard to try and get it off the fan because the cpu was glued to it with the thermal compound.

Started to see higher temperatures on my laptop CPU after running the laptop for 1.5 years. Decided to try some better thermal compound to see if this would help lower the idle temperatures on the laptop. There is enough thermal compound in the syringe for several applications and I only used it on the CPU and GPU of my laptop so there is still plenty available. After application I saw about a 10°C temperature drop at idle speeds. In full gaming mode the fans are a little quieter but the temperatures are still run at max 95°C. Hopefully this will create a little less wear and tear on the laptop.

perfect for what i needed

Great for its first year in use only problem even with cap on it dried out in tube so couldn't use again later...might just be a one off though

Recently started having problems with 4 year old Dell laptop overheating even on a fan pad with all fans and cooling fins dusted and cleaned on a regular basis. Processor was in the 60-80s between idle and minimal load on the CPU and GPU. Scraped off all the factory paste and applied the Arctic paste and laptop is running at in the high 40s to low 50s. Even under 100% CPU load with Adobe it's rarely touching the 80s now. Probably never needed the fan pad in the first place, just better thermal paste.

Not much to say, this works great, easy to apply, temps are good now on a 10 year-old Phenom with deepcool iceblade coooler.

Easy to spread, small package, really good doing it's work

I got this to replace the stock paste on my Intel NUC 8. This computer has always run a bit hot and staying in the 90's during heavy load. After i replaced the thermal paste the temperature went down 10 degrees C. Since then, even under heavy load my CPU has never gone above 86 degrees C. I don't know much about any other thermal paste, but from my experience I love this one.