⥠Power your network like a pro â no downtime, all uptime.
The TP-Link TL-SG1008MP is a high-performance 8-port Gigabit PoE+ switch delivering up to 30W per port and a total 153W power budget. Featuring plug-and-play ease, durable metal construction, intelligent overload protection with port priority, and reliable IEEE 802.3X flow control, itâs designed for seamless, stable, and efficient network management in professional settings. Backed by a 3-year warranty and US-based support, itâs the smart choice for millennial managers who demand power and reliability.
Case Material Type | Metal |
Item Weight | 0.93 Pounds |
Item Dimensions L x W x H | 11.57"L x 7.09"W x 1.73"H |
Data Transfer Rate | 1000 Megabits Per Second |
Current Rating | 1 Amps |
Upper Temperature Rating | 1 Degrees Celsius |
Interface | RJ45 |
Lower Temperature Rating | 1 Degrees Celsius |
Number of Ports | 8 |
Compatible Devices | Compatible With IEEE 802.3af/at Compliant PDs |
G**D
đď¸ Premium Build and Seamless Plug-and-Play PoE Performance
â Practical Testing and Honest Impressions:I was hardwiring eero systems and needed a PoE switch to directly support exterior eero units. I chose the 8-port version, and from unboxing to installation, I was impressed by the build quality, ease of use, and performance stability. This is rack-mountable and includes mounting brackets and screws, but I opted to keep it freestanding and used the included self-stick feet to protect the surface underneath.âď¸ What to Know in 30 Seconds:⢠8 PoE ports with automatic prioritization (Port 1 highest priority)⢠Total power budget of 126W⢠All-metal housing with rack-mountable design⢠Includes rubber pads for desktop use⢠Plug-and-play setup, no software or configuration required⢠Overload protection with power prioritization⢠Solid value for build quality and functionalityđ Design and Build:The all-metal chassis gives it a premium, substantial feel, no cheap plastic here. It feels like enterprise-grade gear at a consumer-friendly price. Ventilation is passive, and the case is clean and minimal without being flashy. The power prioritization is a smart touch, helping avoid issues if total power draw exceeds the rated 126W.đ§ Practical Use:Install was flawlessly simple: plug into power, connect Ethernet to the ports, and it just works. I used this to support a set of wired eero systems, including units mounted outdoors, and it delivered stable PoE with no fuss. I havenât run into any overheating or power draw issues, but itâs great knowing Port 1 gets priority if that ever happens.âď¸ Advantages:⢠Solid, premium construction⢠Includes mounting hardware and adhesive feet⢠PoE prioritization for power-hungry environments⢠Works flawlessly with eero systems and other PoE devices⢠Silent, fanless design⢠Truly plug-and-play⢠Excellent price for the qualityâ ď¸ Considerations:⢠Not managed (no advanced switch configuration)⢠Prioritization is automatic and not manually configurableâ Best For:⢠Home or small business networks needing PoE⢠Users adding PoE cameras or access points⢠Installations requiring hardwired power⢠Anyone looking for affordable, reliable plug-and-play PoEđ In Conclusion:This 8-port TP-Link PoE switch is one of the best values Iâve found in the networking category. It feels premium, operates smoothly, and handles power distribution intelligently. Whether youâre mounting it in a rack or setting it on a desk, itâs built to last and works without a hiccup. Exactly what I needed.â Star Rating: 4.8/5Honest, detailed, and unbiased reviews ensure that every purchase may be completed with confidence. This feedback is based on real experience, offering clear insights to help consumers make informed decisions.
H**E
Great price for a 16-port POE switch.
Great price for a 16-port POE switch. Not complicated. Just dumb switch. Very reliable and it just works.
N**8
Great Switch, Works as Advertised
This switch does a great job of powering the 3 Raspberry Pi 5 boards I have connected to it and could, in theory, power a 4th. Speeds reach gigabit, as expected. It is silent. I don't have too much reason for it to be a managed switch, but has all the right settings which would integrate into my VLAN'd network.One small gripe is that the power supply for it is much larger than the switch itself. If you're buying it for the footprint, expect another 1.5" x 6" x 4" (approximate) for its installation.
F**S
Bit weak for all POE ports at once
Really aimed at half non-POE use. Actually a little short on power even at minimum POE power when using all ports. Though reading specs with a little math should make that obvious.I would not suggest this switch for use even a small number of 8K cameras. It just lacks the bandwidth. Such a pairing defeats the purpose of buying 8K instead of 4K cameras...unless its a temporary solution running in 4K or lower mode just until a better switch can be obtained. By itself this switch could be considered a throwaway (or repurposed to lesser role) later.Also a bit short on port speed/bandwidth when used with all modern mid-resolution 2K-4K cameras. So individual 4k cameras many need to lose some detail to compression etc. But most importantly this switch lacks a high speed "upload" port for sending all other ports to the NVR. So considerable planning and compromise is necessary when using this switch with a full complement of anything but the cheapest modern security cameras. Again its obvious with little math when looking at the specs.
R**N
Static IP address makes configuring isolated network very easy.
Working with this network switch was my first experience setting up an IP-based video network. I was advised to purchase an unmanaged switch which this one is. So this switch has a static IP address which is perfect for our purposes. We currently have 3 PoE cameras and a PTZ controller connected to this switch and the IP addresses need to all be static. I like that this switch offers PoE over all 8 ports because that allows us room for growth and flexibility. For a newbie in IP network switches, I lucked into this one. There are so many available and I had only minimal knowledge of what I was doing when I purchased this one.
K**N
Does what you expect a PoE switch to do
Switches those frames around and powers my wireless AP. This is only manageable via the built-in web interface. It is not compatible with the Omada controller, just FYI.
H**L
Flawless
It's a dumb switch so there's nothing to configure. I specifically wanted a rackmount switch and this fit the bill. It's been happily running POE cameras since the day it was installed.
D**.
Can't go wrong with TP-Link.
This little POE switch is great. I have been in the Networking field for over 25 years and I have found TP-Link to be a great manufacturer of various network gear. This little switch has plenty of power to run four POE cameras that I hooked up. The switch plugs into a TP-Link Deco for wifi since it is located in a stand alone garage. The interface is simple and easy enough to understand. I am used to using Cisco and Juniper products all these years and using the CLI (Command Line Interface) with them.My only two comments would be I wish the power supply was built in or not so large. A wall wort would be nicer. Also if there was a CLI and SSH I would feel right at home (work) ;^)
Trustpilot
2 days ago
1 day ago