Yale Touchscreen Deadbolt with Z-Wave in Oil Rubbed Bronze

I have Abode home security & automation system and needed a lock that works with it. The Yale Assure lock with z-wave was up and running in 10 minutes (to be fair I have installed a lot of regular dead bolts, this isn't really any different, just have to make sure you put the wires in the right way, but that's pretty easy). The z-wave integration with Abode was easy enough, although if your not tech savy you may struggle with that part. Nice that I can set it up to notify my phone when its open, AND I can lock and unlock through my Abode phone appThe lock is grade 2, so better than a regular cheap deadlock you'd pick up at the hardware store, so it is a step up in security, just make sure your strike plate on the door frame using 3 inch long screws that reach the frame, otherwise it won't matter if you have grade1 or 2 or 3 deadbolt- anyone could kick it open in a few seconds. This comes with everything you need, screws and all, just make sure it goes all the way into the frame of the house and not just the trim.The touch screen is very nice and responds very well and the autolock function works really well, especially when you have kids and hands are always full... no fussing with keys is such a luxury that I wish I gotten sooner. This thing looks fancy too.I can't say enough about my first impressions. That being said, I will update in 3 and 6 months...Update: a few months in and I couldn’t be happier. Opening it 5 times a day at least and battery is still strong. No issues, works great!!

Our Schlage keypad deadbolt lock broke after 8yrs of service. I decided to replace it with the Yale Assure Z Wave smart lock to integrate it with our SmartThings (ST) hub.Installation was very easy. The only issue I ran into was the deadbolt mechanism did not operate smoothly when I first installed it. The installation diagram mentions you need to check that it moves freely at each step of the way and although I thought I followed the directions it was still sticking. It appears the deadbolt mechanism and the interior/exterior covers have very small tolerance so you need to constantly check for smooth operation while mating and fastening them through the deadbolt mechanism (it might help with an extra pair of hands).One thing I dislike is the included rectangular strike plate for the door frame. It would have been nice if Yale provided a plate with a lip.As for programming the lock, there are many reviews/comments saying this Z Wave lock does not show who unlocked the deadbolt in the ST app log. This is inaccurate. You can see who unlocked the deadbolt if you follow the directions below:1) Follow the directions that came with the lock including the step where you set your master entry code2) DO NOT create regular entry codes using the keypad. If you created entry codes from the lock's keypad, ST history log will only show "Code 2" or "Code 3" as the one who unlocked the deadbolt. If you created codes using the keypad, you'll have to do a factory reset and start over.3) Open the ST app on your phone (I'm using an iPhone app) and on the upper left corner of the screen, tap the three horizontal bars (menu bar)4) Select SmartApps5) Add the Smart Lock Guess Access widget by tapping on it6) Once the widget is added, you'll see the widget on the main screen. Select the widget.7) In the upper left corner of the widget screen, select Lock Codes and then select Invite Guest8) Complete all three fields and save them for each account you are creating. The info provided in the "Who will be using this lock?" field is what will be shown in the log.9) You can click on 'History' in the upper right corner and you'll see that each account has been created with a date/time stamp.10) Users can start using their entry codes immediately. However, their unlock history will not be logged. It seems it takes 4-6 hrs for the user log history to be activated in ST. After 4-6 hrs, when a user unlocks with their code, the history log will show the date/person/time of when the deadbolt unlocked.11) You can turn on notifications in the ST app and iPhone to notify you each time the deadbolt is unlocked.

So far I have really liked this lock and it has functioned flawlessly. I like that it is a one press lock and you don't have to enter the code to lock. The lock moves smoothly with no issues. The zwave functionality has been working well for the most part. It is directly connected to Smartthings with no issues, but I also have it connected to Home Assistant (via ST). Whenever HA restarts it always thinks the lock is unlocked even though it is not. That is not a lock issue, just mentioning for others that may be looking for a HA integration. With that said though, these locks do seem to be overpriced for what they are. A simple combo powered lock runs less than $50 these days, not sure why manufacturers think the zwave connection part is worth another $100.

I purchased this lock and had to return it.Even with assistance from Yale Customer Support (who were very nice) the lock would not allow a master code to be set.This is a lovely looking lock. The actual manual lock was lovely and smooth. IF the programming had worked on the I think I would have liked it immediately....Second attempt.I had experience installing the lock and had watched tons of videos because of the first lock usses.This time the lock installation was quick and had it installed, master code set, 3 user codes set, and paired with Samsung SmartThings in less than 40 minutes.Couldn't be happier. (Well wasting hours the first time is why I gave it 4/5 stars)