70mm Intake Manifold Throttle Body Replace for K-Series K20 K24 RBC/RRC/PRB/PRC Pattern Acura RSX

This will now be my 2nd purchase of this tb for a k swapped civic and I have to say it’s a perfect fit and bolts right up to my skunk2 intake manifold with ease . Cheap alternative for the guys out there building on a budget . I was able to put down 585hp with this tb money well spent !

Worked great ! Made 215hp with a stock k24 only bolt ons and rbc manifold

Does not seal properly around throttle body plate causing bad idle. You can see all the way through if you angle it good enough

This throttle body is a good quality budget friendly option for people not looking to break the bank. The spring stiffness is perfect and the throttle plate snaps very smooth, the pulley is adjustable making it easy to install multiple different cables,Only reason for the 4 stars is that the included hardware does not work the bolts to hold the tb in place are too short, and the iacv plate at the bottom does not have the recessed grove for the o-ring , I used honda bond to seal it , if you’re not using a iacv then it comes with plugs to cap it off.This item is very simlaur to a ktuned tb

Great product great performance and doesn’t break your pocket

In an effort to save money on my MR2 K24 swap, I wanted to use the stock manifold to start. It had a 60mm TB with drive by wire, which I can't use. I ordered this 70mm TB, and used a burr and WD40 to enlarge the intake, and then rounded burrs to blend in the changes and maintain a 70MM opening. I think this will work great!

It has a missing inlet for IACFits k20z1 but you have to modify the throttlebody cable Mount Bracket If you wanna make it work or just get a shorter cable from k tune, the quality of the Throttlebody is good

Bolts straight up to the rbc, no adapter was needed. I love that the throttle wheel is adjustable to be able to set different positions for throttle cable. Best affordable throttle body I’ll be buying another for my other car here soon