Duttek 5 pin USB Header to USB Dupont Cable, USB 2.0 Type A Female to Dupont 5 Pin Female Header Motherboard Cable Cord (AF/5Pin 0.1M)(2-Pack)

EXACTLY WHAT I NEEDED AND CAME FAST SHIPPING

I'm working on an embedded computer project and needed a way to connect two USB devices internally. This did the trick, however be sure to check the pins on the DuPont connector prior to using, because I noticed the red and white wires were swapped on one. It's an easy fix - there are small "fingers" holding the pin sockets in place. Gently lift them using a needle or pocket knife, and pull out the offending pins carefully, then push them back in in the correct order. I've attached a photo to demonstrate, which also shows the correct order of wires.

I am using this Duttek 5-pin USB header to add a USB 2.0 port to my Hunsn Firewall Micro Appliance Mini PC N5105 4xi226-V version 5. Be sure to align the arrows on the header that indicate pin #1. I like that the cable is snug and well-made. It has no exposed metal that could cause a short. Most USB 2.0 motherboard headers are dual port with 9-pins, so I was happy to find this Duttek designed specifically for a single USB 2.0 port. I recommend this product without hesitation.

I purchased these to bring a USB header out for an embedded system. They work great.

Good product for a USB inside your computer tower. I used it to install led lights inside my glass tower.

I bought these to hook up to the usb header on a RPi CM4-IO module.It seems they are not electrically connected inside the molded plastic case, 5v, ground, and both data lines fail continuity checks.The first time I plugged in a cable to them to test, it was an extremely tight fit. After removing the cable I found the pins had been crushed and would no longer make good contact.Now I need to find another source for this.

Does not work. On any PC I have in any orientation with any USB jump drive. Do not purchase.