White Melamine Edge Banding 3/4 inch x 25 feet Iron On Adhesive Edging Cabinet Repair Laminate Shelf Table Plywood Mdf Board Formica Countertop Furniture Pre Glued Flexible Strip Wood Veneer Tape Trim

It is slightly wider than 3/4" which makes it easier to apply, but you then have to cut it down to size. No instructions are included for the ironing on or the cutting down to size but I found what I needed on youtube. Would purchase this product again.

Sticks well but brittle needs to be more rubberized

Works very well and looks great. Make sure to iron well. Easy to use too!

Set the iron on cotton mode, so steam. Line up edge of tape to one edge and pressed, not slide the iron. only need to trim one edge.If you don’t have a use a purpose made trimming tool, it was harder to do freehand with a razor blade. Satisfying to cover the raw pressboard on melamine book shelves.

Excelente artículo

Smooth finish surface like I needed

Moved into an apt with a cabinet above the stove with no shelves because the exhaust fan went through it — lazy, useless landlords 😐Made shelves from plywood, cut holes for the exhaust pipe with a hole saw, and painted the shelves, but the edges looked kinda janky...until a friend told me about this product. Cut your strip to size, heat up your iron, and roll it on, and quick as that, you have a pretty professional looking front edge of your shelf.NB for the detail-oriented: yes I know that's not brown sugar. Some people really like to focus on the wrong details, lol

This edge banding is not the best quality, the glue seems to be overapplied to the backing, as once it is heated it squeezes out all over the place. Additionally, the one I received had a piece of tape stuck to the good side of the banding in the middle of the roll, and I couldn't remove it so had to throw out that portion of the banding. Another little area had what looked like that pattern of the glue side on the good side, so I had to cut that out as well.All in all, I wouldn't get this again.