24V Power Supply 100W LED Driver Waterproof IP68, 110V-250V AC to 24V DC 4.16A Low Voltage Transformer Adapter for Indoor and Outdoor LED Light, Computer Project Use

Power adapter deliver the right power to an Les display

Waterproof and aluminum body dissipates heat well. Its 100W capacity allows you to power multiple strips with it and the 24V voltage minimizes voltage drop over the run so lights at the end are not much dimmer than those at the first of the strip. Good quality build and does not get too hot (when loaded with 3A worth of strips anyway). Great price too!

The power supply stays nice and cool when in use. The controller gets hotter than this bad boy. Does NOT come with a plug for the input side, keep that in mind. Highly recommended.

The power supply works as intended, I measured the output with a voltage meter and got a consistent 23.9v DC out of it. I wasn't keen on the color coding of the AC input wires, as it was not clear on the labeling which wire was which, it appears to use European wiring standards. The Yellow/Green wire is Ground, The Brown wire is the Hot (Normally a Black wire in the US) and the Blue wire is the Neutral (Normally the White wire in the US).Overall the unit performed as expected once plugged in. It would have been nicer had it come with a pre-wired plug to be able to plug it directly into a wall outlet.But for only 17.99 at time of my review for a 100w 24v power unit. I feel that this is good value for money.

We installed LED COB strip lights in our hall bathroom and used this LED driver. Works well and as intended. The 24v power was a good and safe match for the lights.

It works well for my 24V outdoor LED lamps, without dimmer. It appears it has very good quality. Only minor issue is that the input hot wire is Brown instead of Black. The price is also very reasonable. Good value.

It works as advertised. The housing is sturdy, the lead wires are heavier gauge than others. I daisy chained 3 sets of 16 foot LED strips and they all work perfectly.

The media could not be loaded. When the second fluorescent fixture went out in the lights over the kitchen cabinets I knew that it was time to do something else. I went onto Amazon and found the LED light strip (LLTOP COB LED Strip Lights Waterproof IP67 DC24v Natural White 4000K 16.4ft) that I thought would work best for my purpose, but the light strip did not come with a power supply. This 24V, 100 watt LED power supply fit the bill perfectly and was easy to connect with minimum wiring skills. (Note that the power supply is just that -- it does not come with plugs or connections on either the input or output ends as is clear from the picture online. Proper connections are easily made but this is not simply a "plug and play" device.)With the wiring connections I had to make, placing the power supply and "mounting" the strip lights my little project took about 90 minutes. The transformer in conjunction with the LED light strips is a great combo and I anticipate several years of service from both even with near constant use of approximately 14 hours per day.