7 x Seal O-Ring Maintenance Kit for Support Valve Steam Valve Brewing Group Outlet Valve Compatible with Phillips Saeco Spidem Gaggia

I have a 4 year old gaggia anima prestige that has worked well, but suddenly more water was going into the drip tray and not the coffee cup. Something was leaking internally, and I figured it was the end for the machine. I had cleaned the machine and the brew group regularly, but I never really looked at the o-rings. After seeing this kit at such a great price, I looked closely at the seals I could see, and they were in bad shape. I decided to give it a try before buying a new machine, and, wow, worked like a champ. 6 of these o-rings fit on and in a single water nozzle in the side wall *behind* the brew group, held in with small torx screws. Be careful removing the center of the nozzle to get to 2 rings, there is a spring inside with an end so pay attention to the direction. This was relatively easy, nothing tricky. The thing I wondered about is if it would fit my machine - the table of numbers was not helpful. It did say that it fit gaggia, so I tried it and can confirm it for an anima prestige. I'm grateful the leak was due to failed hardened o-rings and not a tank or pump or whatever else - i never even saw the inner workings of the machine, these are all (6) behind the removable brew group then behind a simple cover. Now I will be aware that if the drip tray is filling faster it's probably time to replace these o-rings.

Perfect service kit for my Gaggia Brera automatic coffee machine. Replaced all critical o rings after 13 years.

I can only comment on the main large ring for the brew group as all other rings are still in the good condition on my 10 year old Gaggia Academia! I’m so happy few dollars saved me from replacing otherwise perfectly working machine, did I mention it turned 10 years old in May? I’m also not a fan of the new $2K Gaggia Academia which is all black and quite simplistic, or modern for some, so I’m beyond happy to keep my chrome „tank” of a super automatic espresso machine on my counter for years to come.

Received this kit for Gaggia Cadena coffee machine. Most of the gaskets were correct fit but the gaskets supplied for the tip of the boiler pin were very slightly larger than the original silicone gasket. When installed they did not seat fully on the pin. See picture. The large gasket and the one for the top of the boiler pin are the correct size. When I tried to contact the seller to get the correct sized small o-ring, I ended up with Amazon Customer service who wanted to ship me another kit (probably with the same incorrect size) and return the one I received (with some o-rings that were OK). Don't want to bounce back and forth on this, I will return the kit and/or source the o-ring elsewhere, unless the seller sees this and can furnish the correct o-ring.

I noticed that water was going into the drip tray rather into my cup when brewing. After a few You Tube tutorials, I ordered these parts and used a T10 Torx screwdriver to change the o-rings on the boiler pin valve. I am now happily caffeinated! The rings fit well and should last another few years.UPDATE: It only lasted a few weeks. I started to have the same problem and disassembled it to notice the replaced o-ring is completely shredded. Very poor quality project!!