(2024 Upgrade) WYBOT C1 Robotic Pool Cleaner for In Ground Pools up to 65 FT in Length, 150mins Runtime, Cordless Pool Vaccum with Wall Climbing Function, Larger Top-Loading Filters

This is a great little robot. It does a great jod of scrubbing the sides of pool and water line...and it scrubs it hard. While it does a freat job picking up most things, its' basket IS NOT a micro filter. Fine particulates will simply blow out of the top. To pick this up you will need a robot with a micro filter or vacuum the pool manually. However, it will pick up a lot and definitelybkeep the sides of your pool clean saving you time scrubbing. I use this in addition to a Dolphin Premier because while the Dolphin is great it picking up micro particulates, it is not good at scrubbing the walls and waterline...its brush is just too slow and weak.

This thing is amazing. I have had three robot vacs since having our pool installed. This one exceeds the other two by far. This is the second year of ownership, and it fired up and started right to work after being in storage for 3 months. It climbs our pool walls without any issues and gets fine dirt off the bottom. I wished it climbed the stairs better. Great value for the cost.

The product cleans fairly well but there's no pattern or program that allows it to be programed for specific area needs. Because of the size of my pool (2500 sq ft) entire pool never gets cleaned before the battery runs out. Find it necessary to charge/replace to cover other areas but never cleans the whole pool. It appears to be built fairly solid and easy to manage in/out of pool with included hook that attaches to the pool pole. Doesn't take long to charge and has variable cleaning options within the app. Does a good job cleaning up fine dirt and brushes sides. Don't recommend this for larger pools but think it's a good value for those that have smaller pools. Gave this item 4 stars because it works well but just didn't work for our pool size.

Love this cleaner , only had it 2 weeks and it fully cleans our 7700 gal Freeform pool fast, charge lasts about 90-120 min. One of the things I was worried about is if it picks lip small particles and dust , hell yes it does ! We have a pebble tech pool and we always feel the pebbles when we r in it and this thing picks up them all . I totally got rid of my Hayward pressure sweep and only drop this in when the pool is dirty like after a storm , I’m thinking I will only need it once a week in the summer as we have literally no debris at that time just dust and pebbles from the plaster . I was able to take my pool pump rpm from 3400 to 2800 now since I’m not powering the full time cleaner . Easier on the equipment and electricity bill. It climbs several levels of our stairs in the pool and all the way up the wall to the water line .So far so good - def recommend .

I use the wybot to clean my 20k gallon pool. I’m in palm spring so lots of wind meaning lots of stuff ending up in the pool. This little guy does a great job as long as you look after it. It picks up sand, leaves etc and really keeps the bottom of the pool clean. I’ve run it quite a bit since I purchased and just have to make sure to not overcharge it and keep the charging points dry. Great product!

This robot does a great job even on the sides up the tiled edge out of the water levelDon’t know how I had a pool for 20 years and hand vacuumed every dayI highly recommend this purchaseEasy to program and to remove from the pool as it finishes at the same location you put in into the pool originallyThe build is good easy to clean out basketAnd it picks up very well small and large debris

It performs as advertised. The set up seems to be important. At first I had it only doing the bottom and it did about 85%, missed a lot by the stairs. I then set it to do the "Whole Pool" and that sucker performed at 99%. It crawled up the corner stairs and seemed to be stuck for quite a while but it figured it out perfectly. The App connects quickly, the filter cleaning is a snap. As for the app, I've found it eventually connects but sometimes the Bot needs to be turned on, sometimes it doesn't, sometimes I just have to turn my phone's Bluetooth on an off, sometimes I have to reboot. The settings also don't seem to lock in, my vinyl pool becomes tile, my shape changes etc. There are also different patterns you can select but there's no explanation suggesting which one might be best. Unfortunately there is no way to know the level of battery charge or the time run from the app. You do know 100% after the 3 hour charge when the status light changes from blinking green to solid green. Be sure to read the FAQ's. The app is a little wonky but be aware it can't communicate unless it is active in some way and not underwater. The easiest time to connect is while it's charging. I've run it every day for a month and I'm 100% satisfied so far, it outperforms expectations.