Ram 1500 Retrofit Performance Muffler 2019-2024, Moderate Sound, USA Made, Stainless steel easy install

Worked great just cut stock exhaust out and this fit perfect. I would recommend picking up some exhaust leak sealer this is the second truck I’ve put one of these on and no matter how tight you get the clamp it still leaks exhaust just put the leak sealer all around the connection and wipe excess away then slide clamp over and tighten it up works great no leaks. Also on 2019 ram if u leave the resonators take a punch and tap the weep holes closed there is two on each resonator. As far as sound goes it’s very mild but great improvement over stock I didn’t want a loud exhaust this time had strait pipe on last ram and got annoying on the interstate this one doesn’t drone.

Put this on my RAM in 2020. Its sound tone was perfect for what I wanted to achieve. The problem I have is after 4 years it is completely covered in rust, and the hardware they supplied is rotting off the truck. However, the rest of my factory stainless exhaust still looks new, so I'm not sure what kind of stainless steel they are using to build these things but not something that lasts.

Good quality, easy install. Last truck had a flowmaster, tried B2 this time, sound not as deep, but ok. Seems good quality, thinking of adding resonator deletes. Painted with high temp paint before install. The exhaust hanger pliers make this a super easy install.

My second time buying a B2 Fab set up and just like the delete I had for my 2015 Tradesman this one was a perfect fit and it sounds great! Needed something that wouldn't drone on the highway or sound like a helicopter when the MDS kicks in and this set up is just what I needed. A little more roar at normal speeds but really has a great sound when you get on it. Hardest part was getting the old muffler off the hangers. As another reviewer stated, maybe go with 1" cut mark instead of 1.25". Definitely recommend!

Great product! Very well made, excellent craftsmanship! Perfect fit!I used a pipe chain cutter to cut the pipe exactly as instructed, 1.5 inches from the muffler, out with the old one, deburred the cut, in with the new one - done! Biggest challenge were the wire hangers. WD40 and a pry bar took care of it.Sounds great! Exactly what I wanted. I spend a lot of time on freeways, so I was looking for a rather quiet, but straight through exhaust. That’s exactly it! It’s a little louder than stock, with a nice, subtle rumble. I didn’t expect any performance or mileage gains from just a muffler, maybe throttle response is a little better.

The media could not be loaded. Not much difference between stock and the Magnaflow. I was hoping for more change in sound. I was looking for a little louder and a lot deeper sound. Also; if i had it to do over, other than maybe going with a flowmaster outlaw or 40 series, I'd make my cut 1 inch from the muffler instead of the recommended 1 1/4".

Could be a little more aggressive but very low to almost no drone, so I’m happy with it.

Love the sound perfect for me, great price and value 👌 👍🏿 😀.