Excel TC304C-Red 31-Inch Steel Tool Cart, Red

So like the other reviews Amazon shipping couldn't understand when it says 1 of 2 on the box there needs to be TWO boxes! You have to return the first shipment and ask for a replacement. Then you get a HUGE box that has the two boxes in it. Assembly is fast 5 minutes? Unpacking takes longer. Value? It's built well. So its worth the price of $160. Only complaint is the manufacture uses a bolt to stop the table from moving up and down. (There are three height that have pre drilled holes) But I had a knob in my junk drawer that fit and replaced the bolt. (Actually was from a battery quick disconnect for your cars battery) Worked great! I recommend this for anyone. Rolls great and it is stable!

Pros: I like the idea of having a tabletop, and tool box configuration. The bolts were good quality. The assembly was very easy and straight forward. The tool box seems to operate smoothly. The powder coat paint seemed smooth and durable. The wheels seem like they are good quality. I like the extra space on the side opposite the toolbox, which allowed me to add an additional unit.Cons: The square tubing allowed the wheels to bend as soon as I put a cut-off saw on the table. I think it probably weighs about 40 lbs. I noticed that I couldn't control the direction of movement when rolling the unit around my shop, and found that the wheels were collapsing the tubing. I had to turn the unit over, straighten the tubing, and then add angle iron support for the wheels. (see my product images). The corner protectors on the top shelf are attached with cheesy plastic push-on grommets, which had about 25% broken in shipping. I will remove them all and glue the corner protectors in place. My shop neighbor was telling me to send it back, but I liked the overall configuration, and had the additional skills and hardware to make the unit work for me. I just think it could have been built better for only a few more dollars.

Excel Adjustable Deck-Locking Tool Cart, Sold by Amazon, ~$165(A) About the product:(1) Functionality: The Excel Adjustable Deck-Locking Tool Cart consists of a very heavy table top, about 15 lbs, sitting atop a small roller cart with a 4 cavity compartment attached. It is just as pictured on Amazon's website. Two drawers of the cart cavities are pullout drawers, one is a small , open shelf and the final one is the floor of the compartment. The drawers are small , about 18 inches wide and 12 inches deep, as is the shelf area. The table top, and the two pull out drawers have thin, rubber anti-skid mats. The shelf, top of the compartment and the floor of the compartment do not have any lining. The table top has 3 small ~3 x 6 "pencil" slots for temporary storage of small parts or tools. They also have anti-skid mats.. The corners of the table has plastic anti bump guards. The whole thing weights about 40lbs. The loading is 80lbs total , with about 20lbs on the corners. There are 4 x 3.5 inch rubber casters on the corners. The compartment has a magnetic latch with a key lock. It comes with 2 small keys. The table top actually adjusts up to 53inches , greater than the advertised 45inches.. Assembly time was about 35 minutes. You will need metric tools……or a Crescent wrench. (12mm, 14mm and 17mm ).Rating : 4.5 stars.(2) Design Quality: It is a very simple design . It is well balanced. The unit has a heavy, sturdy feel. It comes in pieces with a bag of bolts. Alignment is not very good. i.e.: the cart looks crooked when aligned with the roller cart. Material is thick, heavy steel, welded at all major joints and powder coated. In my case , red. All screws are M8 and M6 metrics. There are brass inserts in the main body parts such that the aluminum screws are going into brass inserts. The drawers are roller slide outs with good handles. They are lined.Rating : 4 stars.(3) Manufacturing Quality: It is made in China and not with Apple/ Foxconn quality. The powdercoat is uneven. The compartment does not line up well with screwholes on the frame , so it takes a bit of pushing to get things aligned. The corner bumpers are plastic pop riveted on the corners of the table top. Half of them were broken. Welds were good. Material was good and heavy. The bolt lock holding the table top up on the inner cannula was in very tight , requiring a hammer and a drift to remove it in order to adjust the height of the table top. All appropriate screws were present.Rating : 3 stars.(B) About the service:(1) As advertised: It was pretty much as advertised except the Amazon web page said the max height was 41 inches. I could get this one up to 53 inches (w/ casters).Rating : 5 stars.(2) Shipping and Packing: Shipping was fast and on time with Prime. Packing left something to be desired. The top of the table cannula had punched through the side of the shipping container and had a battle with another package or the side of the UPS truck. The table riser lost. It took a hammer to get it back in shape for assembly. The same riser had been scraping against the inner side of the table and removed some of the powder coat.Rating : 2 stars.(3) Customer service: Not used.(C.) Total Experience: Rating : 4 stars.

Love this Excel tool cart after I finally got my shipping errors corrected. Amazon was simply fabulous to work with as usual. Note you'll receive TWO boxes when this is delivered. If you don't have both, then you can't put the cart together.Also, before fully tightening all your bolts check to see everything is straight and true. You may need to provide some gentle persuasion to get things lined up nicely. Other than that, the cart is extremely useful for the work I do in my garage and it's built well especially given the overall cost.

Awful. I'm an engineer and I ordered 4 of these for my work facility. This product is defective. The middle bolt on the tool box intended to secure the box to the frame doesn't fit and has no threads to go into. Many of the parts came broken and the casters were so poorly pressed into the metal half of them fell out just picking them up out of the packaging. Such a shame too, it seems like a great design, just poorly executed.

A top item.Very handy. I am a park assist Back up sensors installer and I use this Tool Cart every day. It' a all in one cabinet.However, upon receipt of this cabinet the casters need to be reinforced with oversize washers, 2 for each caster , so the casters will be more strong and won't wobble, when moved arround loaded. The original installation IS poor and flimsy, thus concerning the 4 casters!But in overall, the paint and the drawers and sliders are very well made and will do it's job disgned for!Very happy end user.Myron E. Jacobs

Exactly as described and what I was looking for. Use it at work all the time and considering one for at home.