Liwinting 10pcs 5 Pin RGBW Led Strip Connector Solderless Snap Down Connector 5 Conductor LED Strip to Strip Adapter for 12mm Wide SMD 5050 RGBW RGBWW LED Strip LED Tape

Description

Product Features: 5pin RGBW/ RGBWW LED strip light connectors are a simple, frustration-free solution for LED strip connection and extension needs. Installation Instructions: 1.Ensure your LED light strip has 5 contacts (+, G, R, B and W). 2.Open the white clasp of the connector. 3.If you have a waterproof LED strip, you should peel off silicon on the surface around soldering/cutting line area, then insert the LED strip into the clasp, with the 5 copper contacts on the LED strip under the 5 prongs in the connector. Make sure to match the + side on the LED strip to the + side on the connector; If you have a non-waterproof LED strip, just insert the LED strip into the clasp, with the 5 copper contacts on the LED strip under the 5 prongs in the connector. Make sure to match the + side on the LED strip to the + side on the connector 4.Close the clasp. 5.Gently pull the LED strip to confirm you've made a solid connection. 6.Your connection is successfully made! Important note: If the LEDs flicker or do not light up, it is because there is poor contact between the connector and the LED strip. To solve the problem, please follow these steps: 01.Power on your LED strip. 02.Open all the caps of the connector. 03.Insert your LED strip into the connector, slightly pull and push your LED strip to adjust the contact points between the 5 copper contacts on your LED strip and the 5 prongs in the connector, until you see the LEDs light up. Package includes: 10x 5-pin Connector for 12mm Wide SMD 5050 RGBW/ RGBWW LED Strip Lights Tips: If the connection becomes loose, the LEDs will flicker or do not light up. Insert your LED strip into the connector, slightly pull and push your LED strip to adjust the contact points between the 5 copper contacts on your LED strip.