Seco-LarmEnforcer Access Control Keypad, Outdoor, Sealed/Weatherproof (SK-1323-SDQ)

Overall a great product. One thing to note, when the epoxy coating was setting on the rear of the unit, it protruded a little on a solder joint so I had to file it down and I used some automotive RTV sealant. I was concerned about a short on the metal I was installing it on because it was a solder joint, but it's working, so no issue. I think that this unit I got may have slipped through QA/QC because otherwise it would have had about an eighth of an inch gap and not flush against the mounting plate. I like the led backlighting on the keys and it has a good tone for the key punch so you know you are entering the code. Much better than the telephone style keys I had before from another mfg.

Paired this with an older FAPD G-90 gate with an Omega controller. It’s capable of much more than I’m using it for and tech support was helpful in answering some questions I had.

these are GREAT, however they only last 3 year or so and then they QUIT working. I keep 1 extra on hand to swap out when needed, but otherwise I really like the product.

This keypad is metal and not flimsy. We live in the country so it is very dark out here and the blue lighting really stands out. Installation was fairly easy. It works like a charm and is an attractive addition to our entrance. Definitely recommend it.

I install this stand alone keypads several project and never fails for years!!

We used the "toggle" function on this keypad to hold a gate open indefinitely as needed for a customer that kept losing their keys to a keyswitch for the same function. They needed to be able to hold the gate open for moving multiple large trucks/trailers through the gate opening. This solved the problem.

The media could not be loaded. Been installing Seco-Larm products for years.Always a good product. 🙌🏼🚪.

Whilst this looks great and so far works well there are some design floors. The back box is a little shallow which is fine if you can push the attached cable through the hole in the surface to which it is mounted but when that’s us not possible there is zero space for the trimmed down cable and its joints ( if reqd ) In attempts to push the front onto place by clipping at the top then applying a little pressure at the bottom to line up the screw holes this results in the top ( very thin ) lip breaking off. I do accept whilst writing this review that this was in part the fault of the installer but still a very easy fix if the back box were slightly deeper .