Cheriezing2Pcs Windshield Washer Nozzles Wiper Spray Kit Dual Holes Compatible with 2000-2004 Avalon, 2001-2003 Prius # 85381-44010

Fit my 99 camry. Takes time to align the stream how you want it. Fit secure and gets the job done.

Fast shipping, worked as expected, highly recommend, thank you.

Heavy on the sprayHole too large but way cheaper than oemWorks for an old beater with out paying too muchSafety first now I can see

Good price

Bought for 2000 Toyota Camry and fit like OEM with added gasket. Nice coverage with dual sprayers. Installed in less than an hour using 1) needle nose pliers; 2) flat head screwdriver; 3) towel; 4) needle:1) under the hood - disconnect hose first and pinch clip to remove/release old nozzle2) topside - lay edge of towel next to broken nozzle to protect hood; place flat head screwdriver between towel and old nozzle to pry off3) install new nozzle with gasket into slot and connect hose4) use needle to adjust the sprayer distribution on windshield!Thanks

Low quality, but somewhat functional - better than nothing. There was untrimmed injection molding burrs and "flash" that I had to trim off before installation. The worse part is that the nozzles were not adequately pressed into place and were sloppily seated - they would either not properly adjust because of limited range and/or would not stay in the desired position (I used a pin as instructed). As others have noted, the jet diameter is larger than stock, so they deliver about twice the volume of fluid as the stock washer nozzles. If you can find the OEM nozzles at your local dealership, it would be wise to purchase there - I was pressed for time and will have to search for them at a later date.

as advertised--water squirts a little low on windshield but does the job

Update to the update - one nozzle has started leaking badly when used, and won’t stay ‘adjusted’ (loose in the socket - Junk. Summertime in Nor California, so only occasional use.Update: Nozzles will not stay adjusted, leak and seem to be getting worse (ten days of light use) you’re better off getting these:Genuine Toyota 85381-AA010 Washer Nozzle https://www.amazon.com/dp/B00FZQ2F5W/ref=cm_sw_r_cp_api_i_HbOxDbRKBZF25These fit in the hood openings just like OEM, and don’t seem to be ‘loose’ as some other cheap windshield nozzle sets are - BUT.... they are still pretty low quality finish and tolerances. Especially around the nozzles, small leaks around the nozzle ball/socket and hard to adjust properly because the nozzles don’t fit in their respective sockets consistently. They (mostly) work, but, I will be ordering better or OEM soon.