🚗 Elevate Your Ride with Style and Protection!
The EKR Civic Seat Covers Full Set is a custom-fit solution for Honda Civic Hatchback models from 2018 to 2021. With a 4-layer construction that includes foam padding and a protective polyester shell, these seat covers offer exceptional durability, breathability, and water resistance. Designed for easy installation, they come with a 2-year limited warranty, ensuring your seats remain protected from spills and stains while enhancing your vehicle's interior.
Manufacturer | LingyueAuto |
Brand | EKR |
Item Weight | 16.61 pounds |
Package Dimensions | 27.6 x 21.2 x 6.2 inches |
Item model number | EKR0117 |
Manufacturer Part Number | EKR0117 |
N**K
Great Covers - Some Installation Tips
Several reviews have gone over how great these are, and honestly the front ones look like they came from Honda that way. I'd buy these again in a heartbeat. I'm mostly here to talk about the installation.This is likely going to be a several hour project. I spent at least an hour fighting with the bolt to get the back seat in place, but we'll go into detail on that later. Any difficulties I encountered installing these is on the part of Honda, NOT EKR or the product.First, make sure you take EVERYTHING out of the box they send you. Why? Because there's a little orange tool in there that is considerably smaller than my fat hands that makes a world of difference feeding these covers into tight places. I didn't notice it before I had the back seats on, and my very bruised hands would have been happy to have that. Now about that back seat... there's a 10mm bolt you need to remove that is just to the right (facing the seats) of the right-hand seat belt clip. A deep well socket and a short extension makes it easy to get to. Just pull up on the back of the seat or down on the cushion and it's pretty easy to spot. Putting this back in after I was finished? The bane of my existence and probably took 45 minutes of arguing with it on its own. About the middle of where both the left and right seats would be, there's a clip that you can squeeze and then lift the front of the cushion up. I have poor grip strength, so I opted for some adjustable pliers and in total the cushion was off within a couple minutes.Putting the covers on was relatively straightforward and simple. The elastic straps work really well and hold these in place just fine. It only took a few minutes actually get the covers on, strapped on, and for the back, to get the zippers closed. These covers seem to go on the same way Honda's seat coverings do, and in this case it greatly simplifies things.For the front seats, I recommend doing the base of the seats first. The instructions (which seemed to me to be much better than other reviewers have stated; probably have been updated since their reviews), show the back first. That's what I did, and while it doesn't complicate things, it does make putting the bottoms on a little more difficult.When I did the bases, I moved the front seats as far back as I could and tucked the straps through the back. I pushed the straps at the front of the seat as far under as I could. This way, you can slide the seats as far forward as they go and you'll have the straps peaking out the back and they're much easier to get that way, while also leaving you room to work from the back seat. Then do the backs of the front seats. You'll have to tilt them a ways back to get the headrests off (and those covers go in in about 30 seconds each), but it took another few minutes to get both backs on and zipped into place. The strap they include there ended up going on one of the stiff wires for the heated seats, as that was all I could really reach.All in all, it took me about four hours total to install these. Almost all of the straps running front to back make these considerably easier to put in than generic, one size does not fit all seat covers. If I didn't know better, I'd swear my car came from Honda looking like this. I would absolutely buy these again in the future. We'll see how long they hold up, but very happy with them as of right now.
R**E
Amazing must buy
These car seat covers look factory. They seem to be made very well. They have dressed the inside of my car up significantly. Did reach out to the seller and they responded very well and was very helpful. Highly recommend. Also look for someone installing them in your car on YouTub helped me a lot.
A**O
Looks amazing
Looks so amazing! There are parts where its not super tight but if i wanted i could get it tighter. I just got a little lazy but its not noticeable unless youre really looking. I get compliments on it and people thing its just the original seats. Definitely worth it
M**O
They are perfect. They look factory.
I brought these for my 2017 Honda Civic EX because my old tan cloth seats would get stain very easy. So I wanted something that would protect them and as well look like if they came from factory. These seat covers were the perfect choice. They fit the seats just right. The quality on these feels better then on any universal seat you will find. The reason I gave 4 stars is that I have only had them for a short periods of time. I will see how they hold up and come back later to update my review.
G**N
Love These!!
Giant pain in the *** to install, but you know what? They look verrrry niiice!! Pay attention to the tags so you don't mix front seat sides. Would benefit from better install directions. Or at least more complete directions lolGreat quality in the stitching, and comfortable padding. Highly recommended.
M**Z
Looks great
It takes some work to get these on correctly. You'll need to know how to take apart the rear seats for a perfect fit ... but even if you don't, you can still get a 90% fit on that looks okay for those.
E**E
Good Quality But Inconsistent Updated
I think the quality and durability are great ONLY for the driver and passenger seats. The back seat bottom is where the problems are. It is missing two seat belt holes (passenger side and center seat) which makes this a serious safety issue. You can’t strap in a baby seat or have anyone in the back without the seat belt holes. A serious safety issue.It’s also supposed to be a guaranteed fit but the back seat won’t sit flat and is bunched up because you can’t strap in the bottom piece without removing the seat. But without the seat belt holes there is no point in removing the seat to put these on. (See pictures attached)I don’t know if I received a defective piece or if this was a design flaw. But overall this is very disappointing especially for the price point so I’m only giving this one star.Update: Customer service tells me that if I remove the seats to install the seat cover, the seat belt hole will work. It’s missing the hole. How will a hole that doesn’t exist all of a sudden appear if I take the seats off? They then say they’ll send me a new one. A few days later say that the product I received is fine and I just need to take the seats off, so they’re not sending a new one. For the customer service I received, I’d give this negative stars. If you have problems with it, they won’t help you.
Trustpilot
2 weeks ago
3 weeks ago