Laptop Skin Sticker Decal,12" 13" 13.3" 14" 15" 15.4" 15.6 inch Laptop Vinyl Skin Sticker Cover Art Protector Notebook PC (Free 2 Wrist Pad Included), Decorative Waterproof Removable,Cool World Map

Wood grain might not seem to be the most exciting choice for a laptop, but I want peace.Fitting is straightforward. I stuck the cover on, and trimmed the edges with a sharp knife. Easy to do so no risk of harming the laptop.My laptop has gone into bags, been packed with other electronics and sharp things, and the cover shows no signs of wear - so far. But the cover comes off cleanly and is cheap so I can sacrifice it to save the laptop.The main thing is it's distinctive. Everyone else either has boring silver, or something dramatic. I can pick my laptop without worrying if I've confused it with someone else's!

Really nice colour and easy to apply. Had to cut it down a bit but fit nicely. The quality is good but it’s peeling a bit after a year.

Easy to apply and reposition if needed. Looks great. I've added some crystal gems to it for extra sparkle

It is okay, not the best quality to be honest it is quite thick for a laptop skin, so does not stick how it should, as you can see by the corners. I can’t see it staying secure for long. On the up side it is really pretty just too thick to be on a lap top, it would be better used as a vinyl covering on something that is not a lap top. When cut to size for my 12 .3 I lost some of the detail not much, but still.

Fits most smooth laptop cases, however great talent is needed to cut it down to size for a 14 inch device or smaller. The price was reasonable and the print was true to the image displayed. The skin is super durable, have had it for 8 months+ with minimal signs of wear and tear. Will definitely buy more in the future.

Though this is fairly cheap, its not worth the money, The print quality is very low, extremely blurry. Clearly they used a low resolution image and stretched it without even maintaining the aspect ratio of the image. I purchased it and then threw it in the bin, complete waste of money

bought last year , still as good as ever ,, never faded and will remain on for length of life of my laptop , super cool

The Good: I ordered this as a level of protection for my laptop lid. I fitted yesterday very easily applable and I was able to cut to sizeeasily. It's nice and thick so I think it will protect the lid well.The bad:The picture quality was very disappointing, it was quite pixelated and not as crisp as the image leads your to believe.I have a 15.6inch laptop and it recommends cutting to size, if you have a small laptop such as a 13inch you will be cutting out a lot removing a lot of the world map.2* because of ease of application and thickness (hopefully durability) but I am already looking at possible replacements from a different vendor. I probably should have sent it back straight away but I needed the protection for a couple of tasks I need to do.

Since it doesn't mention it in the product description, note that the cover works on HP ZBook 16" Laptop!

I would recommend recommend this product and the ease of Install is definitely there. I also like the thickness and durability of material.

My decal was easy to trim and place on the laptop. Turned out great!

I specifically needed a certain size like it says not 1 hugeee one you have to cut and adjust so it ruined the picture and the ones for the inside didn't fit I had to rig it all by the time I cut it to fit I messed up and couldn't use it at all and wasn't gonna try and send back a chopped up picture it's just definitely not recommended

Absolutely love this! It's much thicker than I thought it would be as a "sticker". I used a T-square and xacto knife. The grid pattern on the back was helpful, but if you trust only it, your cuts won't be square.Laying it down was so easy compared to screen film because of it's density.Once cut, start with one side, peel back and crease the backing paper about a third of the way. Position using your thumbs as guides for the adjacent edges. Once you've got your positioning, pull the backing down as your squeegee down the center to the opposite end. I used a plastic spatula through the center to lay it down and then diagonally to the outer corners. If your cut is great and your positioning was accurate at the start, it goes down perfectly. You can lift it a tad to reposition but be careful to not pull on it or it may alter the fit. Work on the measuring, cutting and initial positioning and let the thickness of the material do the rest of the work for you. The corners on my Lenovo are a bit rounded. Once the skin was on, I simply flipped the laptop over and used the xacto to shape the corners. To soften the edges on the corners, I used an Emory board and smoothed the roughness away using a downward motion.Yep, I'll absolutely buy another from this company in the future. Oh and the print quality - color and sharpness is excellent.