Brass Garden Hose Adapter Swivel Fitting, 3/8” Barb and 3/4” GHT Female Connector, Heavy-Duty High-Pressure Support, Rust and Corrosion Resistant

Very fast shipping. Good quality. No leaks !! Solid connection and the barb bites good. Works well

Excellent brass fittings and washers. Used for making several connections and they are effortlessly leak proof on my pressurized system. The barbs are snug but not difficult to install, would recommend.

These worked perfect for my kid to play with the hose outside.

Generally good. High-quality metal work. The barb seems just the right size for my 3/8 tubing. The "seal" between the base (with the barb) and the "nut" might have a problem with higher pressure water. My use is for a dehumidifier and this is very low pressure water!

Fits fine, but for hoses with coiled steel, the coiled steel doesn't easily crush when one tighten the hose clamp. It's not the adapter fitting that's the problem; it's the coiled steel tubing protecting the inner hose.I thought the o-ring was leaking. I was wrong; the leak occurred at the barb because I used the wrong size clamp which didn't seal the plastic to the barb. I have two hose clamps. One smaller one on the barb and inner plastic tubing and a slightly larger clamp on the coiled steel which is barely holding on.Also, one can find the same adapter fitting at a lower price at big box stores.

They were just what I needed to repair my hose. The price was much cheaper than the big box store.

Worked perfectly for and back of my dehumidifier to put the brass hose adapter on the back of the dehumidifierand then attach a plastic hose 3/8 inch to it.

Worked fine