ChanceryChancery Unisex Watch Repair Tool - Snap-on System, 12 Assorted Dies (24, 26, 28, 30, 31, 32, 33, 34, 36, 40, 42 mm), Crystal Glass, Professional Adults

What a great tool this is for pushing those tough watch backs back on...It's very well made and the nylon inserts (12 in all)...6 male and six female are reversable giving you 12 sizes in total and are very firm but not so as to damage any watch part such as the glass.or back plate..No instructions come with it...but to be honest...if you don't know how to use it,then you shouldn't be doing watch repairs in the first place..My first back I tried it on was my Botta Uno...this was impossible to put back on with fingers alone ( as are many other watches out there which are well made or give a goodseal)...and after choosing the correct inner and outer nylon insert it snapped back into place with ease...no marks,no damage...I had several other watches also which needed to have the backs put back on and and this tool did every one with ease.. One tip I would recommend would be...Choosing the correct back plate die is just as important as the glass side...Choose the maximum size to go right to the edge of the back plate as this makes sure the back plate sits square on the watch case and pushes just the edge and not the inner part of the back plate which you might disfigure if to much pressure is exerted...Some people think that using a smaller size will do it...but as I just mentioned you might bend the back plate. For a ten pound note this is a bargain to do all those tricky back plates and make changing your batteries a much easier task..Recommended and super quick delivery too..Cheers

Just received watch back closer today. I was very doubtful that it would work on my Armani watch , which is very large and a strange shape. I have tried and tried all different techniques gained from Utube and also a visit to local jewellers. To my amazement I used the largest adaptors and with one gentle squeeze it just popped and the back is on safe n sound. Fantastic what a tool. Thank you.

Very good product, well made and simple to use.I could not refit the back off my expensive Skagen watch, and did not want to risk damage.Also heard many Jeweller's will not risk them either.So bought this and a bit scary to use.However Only 4 stars due to lack of advice. DO USE U-TUBE OR SIMILAR VIDEOS TO GET BEST AND SAFEST WAY TO DO THE JOB.Very pleased

Well made and does the job.Would be better if there were some directions describing exactly the best way to use it,ie: which sets of dies to put on the top plunger or the base screw size of the dies in comparison with the watch face and back, and that slow gradual pressure is better than heavy force.It is easy to crack the lens of the watch face if you are not careful.Size of each die should be marked for ease of identification.The produt lacks sofitication and some type of holder would be better than a bag of dies and a loose applicator.Not really good value but i guesse the best of a bad bunch.I think Amazon could find better quality and with a wallet case for this money or a much cheaper price for this standard of product.

Item arrived very quickly, exactly as described.There are six sets of double sided closers ranging from 22mm dia to 40mm dia. Just select the correct size required to close the back of the watch, attatch the recessed part to the base of the closer press by the thread in the base (the recess is to accommodate the face of the watch), then attatch the correct size blank closer to the top of the press by the same method, align your watch face down gently but firmly operate the handle...job done.At the price this is offered at, this item is a snip. Just wish I'd have purchased it earlier.

Well whist we were in lockdown my wife's watch that i bought for her when we were married 10 years ago stopped , i thought it would be a doddle changing the battery and it was until it was time to put the back on, i used a bench clamp and crack , the crystal was smashed. So i looked on Youtube and saw the instructions for this clamp . I ordered a new crystal and replaced it and the battery , the watch now works perfectly. I would also recommend this kit from Amazon H&S 155 pcs Watch Repair Tool Kit , all the main tools are there for simple repairs https://www.amazon.co.uk/gp/product/B00BVG3JMS/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

Cheap and works. Needed to put a pressure back onto a watch and could not get it at all. Couldn't even get it on with the press at first but slowly applying more pressure onto the watch, rather than as hard as possible as quickly possible seems to done the job. Timpson was £4 to put the back on, with me taking it off and replacing the battery so that's half paid for the press already and I have plenty of watches that will need this so you definitely save money, 5/5 stars.

Worked just fine. It took a few minutes to figure out which nylon inserts to use - I eventually decided that the one that only pressed on the metal surround would be the best bet. Used that and the face of the watch clicked into position with no trouble. I had to press quite hard, but it clicked together just fine. A useful tool.