🎉 Elevate Your 3D Printing Game with YOUSU PLA+!
The YOUSU PLA Plus (PLA+) Filament is a high-performance 3D printing material designed for professionals and enthusiasts alike. With a diameter of 1.75mm and a dimensional accuracy of ±0.02mm, this filament boasts 5 times the toughness of standard PLA, ensuring durability and reliability in your prints. Available in a variety of colors and meticulously wound to prevent tangling and clogging, it is ideal for a wide range of applications from functional parts to creative projects.
| Manufacturer | YOUSU |
| Brand | Yousu |
| Colour | 06 Black/White/Gray/Red/Blue/Green 6x250gpack |
| Material | Polylactic Acid |
| Manufacturer Part Number | YS-MPLA-6X250g-Pack A |
| Manufacturer | YOUSU |
S**A
Makes really Novel prints
The filament sticks well and prints well. The glow effect it really nice, as it has a speckled look to it. If I had to choose a con it work be that it's pretty abusive on nozzles, but that's to be expected with glitter filament.
K**I
Nice Red PLA
The filament has a nice Red color, which is just what I was looking for to print some board game organization trays. The temperatures were very close to PLA. I did need to increase the bed temp by 5 degrees for better adhesion, but the nozzle temp was the same 200 as my standard PLA setting. These larger trays can be a stress test of first layers. After fixing a z offset issue from a recent change to my printer, everything came out great.
F**S
Superbe effet soie !!!
The media could not be loaded. Premier achat de filament de la marque Yousu3D et je suis littéralement comblé, l'effet irisé de la soie est vraiment réaliste avec cette couleur blanche.Les 2 premières impressions ont été faites en mode, je charge le filament, je découpe le fichier vite fait sans faire plus de réglages que ça et je lance l'impression, j'ai juste choisi de mettre la couture en aléatoire pour essayer de donner un effet sur l'abat-jour, et compte tenu du résultat, je sais qu'en affinant un peu les réglages je vais pouvoir faire des impressions extraordinaires avec ce filament.
B**7
No bed adhesion, high temps needed.
I tried alot of filaments over the years, never had i ever such a bad experience as with this filament. I had to change my bed temp from 60 to 75°C to even get it to stick a little to the bed. Nozzle temp need to be alot higher to, normally i print at 190°C, with a first layer setting of 195°C.At these higher temps you can print somewhat decent things as long as they are not to detailed.
M**E
Tricky filament
Be sure and do a temp tower. I had a lot of stringing when I ran my normal pla settings 235 on a K1. Temp tower showed I needed to be much cooler at 200 and uping the flow, printed well after that. Great color and the glow is very nice. I really like the dual extrusion, it is different from the coextrusion that you see on most pla. Just be sure and run your calibration
Trustpilot
3 weeks ago
1 week ago