ZIRO PLA Glitter Filament 1.75mm 3D Printer Filament PLA 1.75mm Twinkling Color Series 1kg(2.2lbs), Dimensional Accuracy +/- 0.03mm, Twinkling Transparent

Omg this colour is amazing prints are really smooth with this beautiful filiment love it

Not often you find a Glitter based 3d printer filament so had to give this one a try.Print results were very good and it produced some very attractive models.

Great filament, good finish

Okay, first thing - the colour is superb, light catches the glitter sparkles well and it does look good for some decorative print jobs. Not had a problem with bed adhesion at 60 degrees.Second thing and this is the minor problem I experienced: most print jobs using 'normal' PLA usually run at a max of around 205 and 60mm/s with a 0.4 nozzle. Looking at the blurb on the reel, they suggest a range of 190-220 degrees. I'll admit that I was almost tempted to throw this reel in the bin after numerous attempts to get a decent looking print left me frustrated. What I noticed was that at 205 degrees, the extruder was struggling because the hotend was clogging frequently. I took the reel of the CR6 max and put it on the ender 3 to do an identical job on both. The glitter was now running on the ender 3 but this time I put the first layer at 230 degrees and 220 after. No clogs and no extruder struggling.So my advice is buy this but don't heed the parameters the manufacturer suggests, up your hotend temperature to get the best out of this.

Was a bit concerned about using this PLA after having read a few reviews talking about abrasion due to glitter particles. Despite this, it worked well by using fairly standard PLA settings. One thing to note is that the material seems to be a bit more plasticky/brittle compared to normal PLAs. I am using a standard Creality Ender 3 V2 with 2 filament guides (which I would strongly advise to mount for materials that are more rigid) and an aluminium extruder.The colour is semi-transparent and glittery... it looks great, as you can see by looking at my hairy unicorn ;)As mentioned before, I had no issues with my standard 0.4mm brass nozzle. I've used a 210C nozzle temperature and 65C bed temperature. Printing speed between 50-60 mm/s. To date, it has been performing well at different layer heights.To prevent potential abrasion, a note of warning would be to consider using a steel or hardened metal nozzle if you are planning to print a lot of models with this PLA. If you do that, you may want to test a slightly higher temperature (e.g. 215C) given the fact that non-brass nozzles tend to dissipate heat more quickly.

Never heard of this brand before but decided to take a chance and buy a spool of the twinkly red.. printed a test print of a fidget spinner on my bambulab P1S and it came out brilliantly.. can't wait to buy the other colour

This is a fantastic filament at a fantastic price!I recently received a reel of this in black and I am genuinely impressed with this filament, the colours look amazing and the glitter fleck pattern is very similar to the transparent ‘Twinkling Filament’ Ziro also creates and they look amazing on their own and together!I printed this cat model as a test which turned out great, solid layer adhesion and no clogs or jams. One issue I had was that the filament snapped a few minutes into using, I believe this may have been my fault when setting the reel up in my printer however I would definitely say it would be a good idea to check this before running a print, Ziro do mention this in the important tips section of their description which I’d advise checking over.The addition of a resealable bag for the filament is also very welcome, I tend to put the filament and the silicone packet that comes in the vacuum seal both in to ensure the filament does not go funky.It looks good, prints good and for the price you really can’t beat it.This was printed on a Flashforge Creator Pro (with flexion extruders) at 220c hotend and 50c bed

I'm not sure what happened to this colour, but the it is not the same as before. The first photo is what I bought now and the second photo is what I used to use. The new stuff is not even close to the quality of the old one. It feels cheap and really weak. Even the colour is different.

This Purple PLA Glitter Filament is awesome! The color is super vibrant, and the glitter adds a really cool sparkle to my prints. It’s easy to work with, no clogs or issues with stringing, and everything comes out looking great. The shimmer under light really makes projects pop, which is perfect for things like decorations or gifts. The only thing is the glitter can make smaller details a little harder to see, but overall, it's a fun filament that delivers amazing results.

I had another ZIRO dark green filament a while back that printed fine but I didn't think the green really matched the pictures posted in the listing for it so I have kind of steered away from ZIRO filaments for a while. It wasn't a conscious decision, but a "meh" experience with a filament can cause that.I saw this filament like a 1/2 a year ago and liked the looks of it, but I held off until it went on sale just in case it was another "meh experience" as I don't normally return filament unless there is something majorly wrong with it.I was hopeful when I got the roll in person that it printed as well as it looked, and thankfully that proved to be the case. A friend who said she wanted a red USB cable winder, so I made her two - one out of this filament and one out of another red filament I really like. I slowed down all the line types to 50mm/s because I have found that is necessary with most "translucent" filaments I have used in the past.All I can say is WOW! This stuff printed really well and came out looking amazing. I plan to print a bunch of roses out of it soon and am actively looking for models to print with it so I can show off how awesome it is.ZIRO, you knocked it out of the park with this one!

Gutes, leicht zu druckendes Filament. Schöner dezenter Glitzereffekt. Dem Filament lag 5 Meter Reinigungsfilment und 5 Meter Filamentprobe bei.Werde es auf jeden Fall wieder kaufen.

I thought it was going to be more silver with a lilac hue, but I still love the actual color!

Je suis immédiatement tombée amoureuse de ces types de filaments, qui donnent une touche si agréable à tout ce que vous imprimez, que vous voulez des articles blancs ou monochromes ennuyeux ? Non ? BIEN SÛR QUE NON ! Cela lui donnera une petite touche supplémentaire pour tout ! Emballé hermétiquement comme il se doit, et comprend même un sac inclus pour le ranger une fois ouvert ! (Veillez à ne pas le ranger dans un endroit humide) C'est du PLA de bonne qualité. S'adapte parfaitement à l'anycubic Cobra 2 pro.Offert avec un fil de purge. Honnêtement, je ne l'ai jamais utilisé. Il suffit de chauffer l'extrémité et de la faire passer jusqu'à ce que vous voyiez la couleur suivante. Il ne laisse pas de résidu dans la buse.Dans l'ensemble, j'adore la couleur et je ferai certainement encore plus d'impressions 3D grâce à cela ! Les autres couleurs sont également magnifiques !