North Bayou Dual Desk Mount Full Motion Swivel Computer Monitor Arm with 13 Adjustable Heights for Screens Up to 30 Inches, Black

I have 2, 32 inch curved UHD Samsung monitors. I work from home and don’t have space in my room for a bigger desk that I’d definitely need if it wasn’t for this desk mount. I was a little skeptical before I installed it but to my surprise it works great and I love it. There’s no way I’d be able to fit both screens on my desk otherwise. Adjusting the height and angles of the monitors is super easy. The hydraulic arms easily support the weight of these massive screens. I couldn’t use the clamp mount because of the way the desk is designed. All I had to do was drill one hole in the back of the desk and rest was easy. So easy in fact my 15 year old son did the majority of the assembly and installation. To be fair he’s a smart kid but still.

The only problem with these monitor arms is that they make we want to just work from home. I have two 32" Omen monitors on these arms and the arms work great. The mounting point on the monitor is not centered so I can't use the rotation feature of the arms. The rotation feature works great, but it only will work well for center mount points on your monitor. The arms are easy to adjust and have no problem holding up big displays.

Great product, well built and easy to install. My only problem is one of the tilt adjustment hex screws is stripped, so i can not adjust the tilt easily on one side. The screw was way too tight, as mentioned in another review, and because of this, I now have one side that can not have the tilt tension adjusted. For that reason, I have knocked 1 star off the review.I used two 32" curved monitors and the only issue I ran into was where my vesa mount is on my monitors. Instead of in the middle like most monitors, mine was located on the lower section of my screens in a recessed section. To mount my monitors I had to add some spacers to make the mount flush, but that is not because of any design problems with the mount arms. Just remember, if your mount location is not centered on your monitor, you may not be able to use your monitors in portrait mode since they will be top heavy and not stay put.The desk is a monarch specialties 71" x 71" L shaped desk, the construction is hollow core, rather than solid wood and the mount seems to be fine on it. I was a little worried it would not support the mount with the monitors without damaging the desk, but I placed a piece of wood between the desk surface and mount, and a hardback book between the twist clamps and the bottom of the desk to distribute the weight better across a larger surface, and it seems to be working out fine. If you have particle board or glass for your desk, I am not sure how it will work. The part that connects to the desk is quite large, and measures about 7" x 4 1/2", so right out of the box, there is a decent surface area to help distribute the weight to a wider area, rather than putting all of the weight on one small area.The articulation works well and can be adjusted easily with the supplied tools, it looks nice and as an added bonus, there are two USB ports for your devices on the base of the mount that can be used. It comes with 2 USB cords, each with the male and female end. You connect the one end to the base, and then plug the other into your PC to make use of them. Cord management is overall good too with 2 removable plastic sections on the underside of the arms that you can channel your power and HDMI/VGA cord through, as well as two other pieces for the back of the clamp section if you need them.This is a very nice duel monitor mount for a fantastic price, and if you are in the market, don't hesitate. I was honestly surprised at how good the build quality was, and couldn't be happier with it.

Holds my 27" monitor and laptop on a versa mount. Working from home for a while so finally took the time to set it up right. My son had a North Bayou arm he loved. So decided to get the same brand. Price is right. Installed easy. Flexible Install options really happy with this purchase and desk space I gained.

I got a white one for my office and it is absolutely perfect. Mine is set up to clip on the back corner of my corner desk. You do need some room in the back to use this way, which I did so it was perfect. One of my monitors is older and really heavy, where the other is newer and quite light. Both move easily when needed.We did a built in for my sons room and tried FOUR other wall mounts and they were all horrible. Finally caved and purchased this one for my son instead and just drilled a hole in the desk and mounted that way. It’s perfect. He’s got a computer monitor on one and his tv on the other. He discovered that it spins and started turning his TV sideways when laying down watching TV and thinks it’s just about the coolest thing ever. Haha.

I really like my new dual mount system! This is an upgrade from my previous NB single mount. The reason for this upgrade was due to a new 32-inch ViewSonic (VX3211-4K), which replaced a curved 27-inch Samsung. BTW, the single mount worked perfectly until I decided to upgrade my monitor.I thought this would be fine, but it wasn't until I tried to put the new monitor on it that I noticed a big discrepancy. The location of the VESA mount on my new monitor is on the upper portion of the back (instead of the center) which (after installation) hangs way too low almost touching my desk.Well, since I really like my single mount, I decided to research the same brand (NB) and I am very happy with the results. I now have an excuse to get another 32-inch monitor (when I can afford it) :)...you know... so that I can take advantage of all the real estate.

Set to the highest position - the instructions are in broken English with no words. It appeared that the screw to adjust the torque was stripped, so even when I used the 5 mm allen wrench it says to use (with no further instructions besides a badly drawn picture that is so small you can't even see it), it wouldn't adjust at all. Do NOT recommend this product.

I bought the Eletab and this one as I have dual monitors setup in my home office and workshop. The Eletab cost twice as much as NB. The NB has solid, thick arms and reasonably easy to assembled. Note that you need at least 3in behind your desk as the arms extend out. The NB is not as convenient to add/remove monitors. You have to take the upper arm off, attach to monitor VESA mount, then put the arm back on the rig. If you have a big, heavy monitor or desk in inconvenient location, it's a pain! The Eletab has plates that mount to monitor back, then easy click in to arms.

Using it for over a year on a 27" new monitor and an old 24" monitor and it works as intended.

Der Monitorarm ist sehr robust, lässt sich recht leicht aufbauen und verkraftet auch größere Monitore (unter 32").Die Stabilität mit angehängtem Monitor überzeugt auch, nach Wochen haben die Monitore immer noch ihre Position, dennoch lassen sie sich leicht variieren.

On the search for a proper dual Monitor Mount for my 30" Monitors i tested 2 other ones which miserably failed to hold the weight, even within specifications.This one superb, easy to assemble, very sturdy and even my 34" monitor is hold up with no issues. The included USB Hub is a neat bonus too.The construction is a very sturdy metal construction with strong hinges and holds the weight easily up, movement in any direction is also not a problem.Highly recommend this product if you have big monitors.

Son muy resistente, y el sistema de gestión de cable es bastante bueno, aunque como uso los monitores para dos cpus, el espacio para los cables resulta muy justo al pasar un cable extra por cada brazo. Son muy versátiles y permiten cualquier configuración, aunque deben tener espacio libre en la parte trasera, ya que una mesa pegada a una pared complicaría esto y haría que los monitores ocuparan gran parte de la mesa en alguna configuraciones. Atención, cuidado con lo cables, deben ser lo bastante largos, ya que si no se quieren tener accidentes, se debe dejar bastante cable sobrante en las juntas para que al flexionar los brazos este no suelte o, incluso rompa los conectores.

Good quality