BINLUNBINLUN Stainless Steel Watch Bands 12mm-24mm Replacement Smart Watch Straps with Straight&Curved Ends Universal fit for Samsung Galaxy Watch 6/5/4/3,Fit for Garmin Watch(Rose-Gold,21mm)

This is a wonderful looking watch band. I loved it so much I ordered another. Link removal was not as hard as some said for me. I believe there is a technique to it that I will share in my next review of the band I just purchased. Seller is also incredibly helpful. If you have questions/concerns be sure to contact as they are very supportive and understanding. Can't wait for my next band to arrive and write another review. If I am right about the link technique helping I will try and share that too. Very happy with my purchase!**Edit**I have purchased another band and it is just as great as the first. This time I had a few questions and the seller was prompt and polite when answering them and offered great solutions at no extra cost to me. I definitely endorse this product and seller.For any having issues with removing links/pins some tips-- Line up the pin with the pin removal pin then hold the band in place against the pin removal tool. One side of the pin will be slightly more inset than the other side of the pin, use that side of the band to remove pins and use the slight inset to your advantage by letting the pin removal tool rest inside the inset. Hold the band in place and slowly tighten the pin removal tool by spinning the knob. Keep it lined up as you go. Once it hits the plastic make sure the pin can push through the opening on the other side of the band and just tighten the knob a little more and the pin should just start sliding out. You can then remove the last of the pin with your fingers once it is mostly pushed out. The pins come out pretty quick and easy once you get the hang of it.Hope this makes sense and helps. Happy DIY!!

I bought this to replace the band on my Swiss Army watch my wife gave me 18 years ago. SA does not make a compatible band so I headed to my pal Amazon. This one was closest.Pros: nice design, feels heavy/good quality, looks good vs. Walmart bandsCons: it took me about 1.5 hours to connect it then size it. The tool and parts are great but everything is so small. I'd also recommend a simpler watch band adjustment method - similar to this which is very easy: https://www.amazon.com/16-22mm-Kreisler-Center-Stainless-Silver/dp/B01MXJ0QHH/ref=sr_1_28?keywords=adjustable+watch+band&qid=1558402704&s=gateway&sr=8-28Removing whole links is cumbersome and if you take 1 link off, technically to balance the overall length and wrist position, you need to remove a link on the other side. I may end up between a bit too lose and to tight. Also, the piece for the curved bezel is really cheezy/cheap. See photo - it creates a gap that will catch on clothing etc. so I just went with the straight bezel connector.All this aside, it's only $16 and I was able to keep wearing my favorite watch.

I got this as a spare for my Carnival Tritium Watch, 40mm case model. It requires a 20mm band. That watch comes with a curved end band. Except for the ends that attach to the watch, it is identical to the original Carnival band. This band fits ok with the straight end if you don't mind the look. It doesn't look too bad, but I like the curved ends better. The supplied curved ends do not fit this watch, the pins do not line up. They do line up with other watches I have but not the Carnival. The good news is that the inner segments are the same width as the original Carnival band. This means that you can take the straight end off and use the Carnival curved end pieces. For my 20mm band, the inner links measure 10.85mm wide. They fit into an 11mm gap.The band is good quality and has good weight to it. The clasp is the same style as the Carnival.The link tools are decent for occasional use. If you are not good with small mechanics, go to a jeweler. You still need some skill to make it happen.

Ordered this for my Seiko SNE109 as I have never liked the rubber band. Lug width is 20mm. The lug holes of the SNE109 are drilled all the way through and the wells of the holes are apparently deeper on the insides of the lugs. The spring bars that come with this 20mm band are TOO SMALL and do not stay in the lug holes on this particular watch. They will literally fall out. Measuring the outside measurement of the lug is 25mm. It appears that the end pins of properly sized spring bars will be visible through the holes on the outsides of the lugs. I ordered a kit with multiple sizes of spring bars that will resolve this issue. I did contact the seller and advised him of this issue. I asked if he could send me a couple larger spring bars with no effect. Now I will have enough spring bars to rain down on the entire world.Update 4-22-2020: Received the spring bar multi-sized kit. I found that 25mm bars were too large. In the end, it was the 22mm bars that worked. The ends of each bar are just visible in the outside lug holes. If amazon lets me I will post a pic of the bracelet installed. In order to install the curved ends, the first link on both end must be removed. I had to remove 3 additional links to size it, which was no issue with the pin pusher that comes with the bracelet. The watch looks far better with the new bracelet.

I purchased the all Stainless steel version for my Hamilton khaki automatic with 20mm lug width so I would have the option of switching from a standard leather strap to a bit more durable steel bracelet. It seems to be very nicely finished, and the clasp works crisply and securely. Regrettably the curved end links don't fit well as they are too tight, and the supplied spring pins are too long and skinny to fit properly. I ended up using the supplied strait solid end links and my own correct length spring pins. I found it very easy to remove links from the band with the supplied link removal tool. All the links seem to be solid stainless steel, which is quite nice for the price of this band. It's a nice band and looks great on my Hamilton watch. It feels good on the wrist and does not pinch or pull at hairs.

The pins on one side of the watch have a little slot on the end, looking like a little screw (but it's not). The other side doesn't. You push from the side without the slot. I only found this out after cocking it up and looking at a youtube video. You also need good eyesight and high contrast light to see "the slots". I did everything wrong in shortening and fitting the bracelet, taking about four different attempts at all the processes but, despite all this abuse, the bracelet was perfect still, once finally fitted. Good points:The clips to release the bracelet, no lumpy big metal tabs.The choice of straight or curved ends where it connects to the watch. If they fit, the curved ends seem to really make the look of the watch case where it connects to the bracelet.The pin pushing gizmo, although the pin part is a little weak. Make sure the bracelet is straight onto it or you'll bend the pin.Brushed and polished bracelet. Using a loupe, it looks really well finished.My watch had a leather strap but the bracelet has transformed the look of the watch face and I don't know why. It may simply be the bracelet added a bit of bling to the watch!

Amazon sent this in a massive box at least 20 times the strap size. Unbelievable!The strap itself is good. Well made. Fairly easy to take sections out to adjust to wrist using tool provided. Intially used the curved links to connect actual watch to strap. Oh so fiddley and difficult to connect. Then one side unhitched itself. Decided best option was to not use the curved links. The straight link to the watch so much easier with its quick on & off pin. It looks just as good. The quick release pin allows you also to change straps very quickly. But for the wasted time trying to fit the curved edges and for it to then disengage nearly losing the watch, I would have given 5 star.

Excellent replacement strap that has the look for a very reasonable price.Pros - looks expensive, nicely polished with a stainless butterfly type centre closure which does not snag or catch on clothing, straight or curved ends to fit watch shape, extras to maintain and fit bracelet.Cons - lightly plated (only time will tell how quickly it wears off) quite light in weight - could be heavier, thin curved ends had to be opened wider to fit the watch neatly.Overall 4/5 and would buy again.

Very happy with the quality and thickness of the product. After many years, I'm wearing my watch and like what I see. I had the last 5 years and maybe more leather strap and that was the reason for me to put my watch in a drawer for a long time, since the original strap was to expensive and needed to send my watch in Italy to change it. The product came very quickly, it was protected well from scratch and, as an advance, came with all the tools that needed (although I have everything already). Although I have never tried, I change it and adjust it in 3 minutes and you can see the result from the pictures.Value for money choice, I believe, and definitely recommend it...

This black metal watch strap looks great with my Amazfit Pace smartwatch. First, I tried to attach the curved end link but that didn't work so I replaced it with the straight end which looks fine. I removed thee links using the supplied link remover tool. To reconnect the link, just drop the pin through the hole and use a pair of long nosed pliers and the pin will snap back in.