Mechanical Keyless Door Lock 6 Code Latch Lock 2-3/8'' and 2-3/4'', Suitable for Home Entry Hotel Office Studio Warehouse Archives

I do not usually review Amazon products but I am obliged to reflect the quality of good taste the simplicity and security of this door lock I bought is very simple is very easy to install and looks and looks great seems made of a fairly resistant material wait for the passage of time to see what happens

Well made , good instructions, mine needed a little tweaking with a few washers to get a good fit with no rattle...otherwise exactly what I needed and best of all no keys needed

Put this to make it easy for kids to get out without keypad. The old lock was problematic with keypad on inside. Came with extra lever for varying lever lengths.

The media could not be loaded. I have installed dozens of locks but this one is not as easy at it looks. Should be straightforward but noooo it's not. These instructions are not easy step by step. No videos on line either for this model.Tried to find company website for assistance but just found sales info and no email found or video tutorials.Instructions say screw "Guide Bolt" into either hole "A" or "B" but it is the wrong thread.Guide bolt is smaller that factory plug that was in A&B.Came with two (2) latches so one spare? (Don't need a spare)I was replacing lock and deadbolt combination and this doesn't cover deadbolt hole.The "Fixing bolts" were too long so had to grind them down 1/4" and that would have had to be more if I didn't use the diamond plate inside and out.Hit Home Depot and purchased 12" X 12" diamond plating aluminum and cut to 4" strips. After cutting, need to file and sand new edge so no cut hazard to people.As can be seen from the pictures, the end product looks nice and works fine but I have to think what if a buyer doesn't happen to have a grinder, diamond plate and some ingenuity to use? The "Guide Bolt" seem to have zero purpose, in addition to the fact that it was threaded incorrectly from the factory. Oops on the factory part.It would be nice if it had a longer outside knob/handle at least as an option but this is doing the job and my tenants will never have to worry about a dead battery from locking them out like the last battery operated door lock we had. I am big into keyless for rentals.When a tenant moves out, just recode the lock so zero relocking fees.11-11-21 UPDATED: OMG, I was stunned how NOT secure these are. I was showing my son the new lock I installed. He looked at me and said "Dad, you realize these have zero protection against opening, right?"He applied slight pressure to knob while pushing each button until it pushed in. One by one he was able to open the lock in under 10 seconds and I didn't tell him the code. This is worthless as a lock. Looks nice but absolutely worthless for security!Try it yourself. Apply slight pressure turning the door knob. Lightly push 1 then 2, then 3, then 4 ect until the button gives way and pushes in. You will see that is your door code and it literally takes less than 10 seconds to open any of these locks. Zero security to this lock!!!! Switching to battery operated Schlage ASAP and I don't even like batteries but this lock is a false sense of security!

I liked the functionality of the lock as far as the mechanical pushbutton entry. I strongly dislike the exterior " handle " as I am going to have to install an additional handle above this one to pull the door shut. Last week, grabbing on the little handle supplied, I closed the door on one of my fingers, because of how un-handy the small handle is to pull the door closed. Surprised I did not break my finger.....For that reason alone, nice lock, but I would not buy it again.

This is a beautiful lock, but you don’t expect you can just install it out of the box. First, you need to cut the screws based on the thickness of the door. Second, you need to align the latch. To my case, I needed to drill the latch hole a bit. Third, you need to drill more holes to the door. If it fails to install, you will have made so many holes on your door. After you can overcome all these challenges, the lock looks so good.

wasn't to hard to set the code, but it's easiest to put it as New lock than substitute a old one becouse of the circular shapes and size of a regular lock, you will have to refill part of the hole. (see the picture)I Will mount it this week and i Will update this review If i have something else to say.

It’s a very good lock, I use it for a small office. It has a great feature you can keep it unlocked, which is very convenient for me because when I’m having a client meeting it can stay open without having to unlock it with the code. Another great feature is that it closes automatically without having to turn the latch/handle.