Glarks 30Pcs 6x65MM Heavy Duty Zinc Plated Steel Molly Bolt Hollow Drive Wall Anchor Screws Set for Drywall, Plaster and Tile (M6x65)

These are to find in home improvement stores, I prefer these over plastic anchors for drywall. They are easy to install and tighten down. Use caution when tightening them down they may snap of pull through the drywall. They will hold most any picture on a wall.

Like others have said, these tend to either drill themselves through the wall or twist themselves into unusable shapes. I found success when I used a pair of needle nose pliers to hold the base and keep it from turning while fastening to the drywall. I also used a little WD-40 on the threads first to help the screw turn easily. Frustrating to work with but once they are fastened correctly, they do the job well.

Great variety, great organizer.

I opted to get these for some heavier items that I needed to hang on my walls. These would be overkill to use to hang family pictures on your wall, so make sure you know what you are getting, but anyways, great wall anchors, very strong, and very well built.I also recommend users to use only setting tools (guns) to fasten these molly tools (wall anchors). It's a lot easier, faster, and prone free to go wrong -- never try to screw these bolts into a wall, it will fail a lot.I've attached two pictures showing two types of setting tools that I use with these molly bolts. I prefer the "red" one, but the "blue" one has a more of a ratchet type of mechanism, that should be easier for those that don't have much strength to squeeze the red setting tool with their hands (Hulk Power!) with one full squeeze.I do like the different sizes that this set includes, makes it easier for most tasks and thickness of walls, keeping in mind that these molly bolts are for heavier items.

Unbelievable! First off the box was busted in pieces and all the mollybolts were loose inside the package. Secondly and yet most importantly, the Molly's are of such poor quality (pictured) the heads are bent away from the body on all of the 25 fasteners. Very disappointed.Update: used a couple of these in my RV. Horrible outcome! Initial installation is crooked because of the construction design and they lost the inside nut so no threads existed for the screw/bolt. Replacement meant the entire backside of the Molly remains inside the cavity. Rattling around. I am throwing the rest of them in the garbage!

I live in a house with on old plaster wall, and it's very difficult at times to get things mounted to a wall. I have a hood over my stove that I mounted straight to the wall because there is nothing to mount it "under" and I at least wanted one of those cheap hoods with the fan and the filter to keep all the steam and grease from disbursing all over the kitchen and condensing on the walls.Well, for the left side I found a stud and got a couple huge screws in there, but for the right side I used some mounting solution designed for modern wallboard and that failed over a couple months as the plaster around the wall anchors slowly deteriorated. So, I decided to give molly bolts a try, so I pulled out the drywall anchors and put in molly bolts that fit the holes most precisely, and they worked great, and now my stove hood is securely attached to the wall. So, this was the perfect solution just when I needed it.

i

I USUALLY USE THE BOLTS THAT COME IN A PRODUCTS PACKAGING. NO MORE. I HAD SHELF UNITS SAG AND CAT STEPS PULL OUT OF THE WALL. I REATTATCHED WITH THE MOLLYBOLTS AND EVERYTHING IS STURDY AND HOLDING . I WILL BE USING THIS PRODUCT WHENEVER I NEED TO ATTATCH AN ITEM TO A WALL.