Sia Art Jewellery SIA VENDORS ¢ Carbon Fibre Twirl DIY Laptop/Trackpad Skin Sticker Lamination Decal Wrap for HP MacBook Apple Lenovo Dell Avita Asus Laptop Upto 15.6 Inch (12x18 Inch Sheet), Vinyl

Great Texture and Legit Vinyl Quality. Looks Durable and Premium af for the Price. Must Buy. Will Cover one 15.6-inch Laptop Easily. Altho, It requires a lot of skill to apply this. With all the cutting and chipping. I'd suggest getting a Detailing Knife if you want yo to work with this sheet. Must Buy if you're into Carbon Fibre Skins/TexturesI wrapped up my HP Pavilion Gaming (R5 5600H GTX 1650 and Redmi Note 10 Pro)

This product requires a fair amount of skill or then you need to be an artist who does fixing of artistic wraps or some work connected to decals. My recommendation is to get the fixing done through a professional skin wrapper because it is impossible to get it done right at least in a few attempts and most will give up.The skin came wrapped in a roll in a cylindrical box with no instructions whatsoever, probably because the seller presumed that customers will look it up on YouTube.On YouTube they make it seem too easy except that it is 100 times more difficult than it looks. What is shown correctly in the videos is that you have to take it out inch by inch from one side and keep pasting it slowly on your laptop after cleaning the surface.After this seemingly simple instruction given by YouTubers everything is very difficult. The reason is that however slowly and carefully you go about it, bubbles keep forming all the time and then you have to roll it back again. All the while you have to keep holding it with one hand and it starts aching after a while.If you think it is similar to fixing mobile screen film or tempered glass, it is like comparing kindergarten to PhD!It took me 3 hours on the first day and I spoiled one half of the paper with hundreds of bubbles and folds. Fortunately it has enough to cover top and bottom.On my second attempt on the next day I proceeded very carefully taking out the paper half inch at a time and pasting it using an improvised squeezy by covering the edge of a credit card sized card. You can use an old credit card also but don’t use one that is in use because you have to apply a moderate amount of force.Even after taking so much effort bubbles will form inevitably but you can roll back an inch when you notice it and keep pasting again.The second attempt took me almost the same amount of time as the first.I used a new paper cutter to slice off the extra paper from the sides. It is a good thing that the paper comes in a large size because if it is the exact size it will be even more difficult because it is tough to match the edges of such a sticky thing unless you tape it down from the other sides like they show in phone tempered glass instructions.I didn’t do it but you can use a heat blower like a hairdryer to heat the corners so that it sticks properly.In the end I managed to stick it without bubbles except the right edge where the bubbles I tried to fix turned into folds and I gave up there after trying a few times. There is also a scratch because in my enthusiasm I used a scale thinking it would be better but it resulted in a scratch.I think it looks pretty decent hence the 4 stars. I would have given 5 if the seller had given some instructions, even if it was a few YouTube links.It is exactly similar to the famous DBrand Carbon Fiber design that costs much more.I had planned to cover the bottom part of my MacBook Air also but I decided against it because of the effort involved and also because it could be more complicated with the possibility of more bubbles, due to 4 legs on the bottom. In any case I did not have any more of it left.I decided to retain the bottom tough case which I had before. The case on the lid affects the hinges in the long run, one of the reasons I opted for skin.I hope others find my experience useful and also hope the seller also includes instructions. If I had known all that I have written here before I would have had extra left and prevented the scratch also.

Please go ahead and purchase it, I have order many laptop skin but this was really Fantastic and worth. Really happy with the purchase

Skin is decent size and also good glassBut installing it by cutting is really hardOnly skilled user with blade can do it

Got an awesome product to wrap my laptop. It's 2 years since I wrapped my lap with this. Value for money as it doesn't even got a single scratch after 2years of rough handling. So I came back to review this product. The one pain is you have to wrap your laptop perfectly.

It's value for money skin gives a simplistic and premium look to the laptop.HOWEVER bubbles kept appearing even though I was very careful and took hours to apply this.If you are skilled at applying it then the end result will look amazing 👍

Those who are saying that this product gives bubbles, buddy kindly improve your skin pasting skills first then blame someone!I have applied it with full precision in just 40 minutes and the end results are incredible as you can see in the pictures!Go for it! Best deal! it's just perfect ❤️

very bad adhesive ......the sticker was coming out from the corners ....even i had used the heat gun ....very bad product.....