for Chevrolet Key Fob Cover Keyless Remote Smart Key Fob Shell with Keychain Fit for Chevy Suburban Tahoe Traverse Buick Enclave Cadillac Escalade GMC Acadia Yukon (White 5-Button)

Works great for a full key fob cover. Looks so cute, and fits good. Some people say they push the buttons but they are hard to push. I did NOT have this problem. My key fob works good with this on. 10/10 recommend

Buttons are extremely hard to push, it looks very cute but I took it off after the first day, it was very obnoxious

The key fob it’s self is beautiful. However it doesn’t work. It fits properly but you can’t mash the buttons and actually lock/unlock the doors with the cover on the fob. It would be great if it actually worked. But since it doesn’t it’s pretty much useless. I will be returning mine.

Like others, when I first put it on over my original casing, it would not work. I was bummed because it’s so cute and I determined to make it work.Here’s how I got it to work:-take off the face cover of your original key fob leaving the silicone covering over the motherboard and keeping the back plate with the battery on it-clean the silicone around the buttons (mine was embarrassingly gross)-insert this into the new face plate leaving the back exposed**I tried just putting the back plate of the new case on and using it that way but it still did not work for me- the buttons were too far down**-cut a flat cotton round (like the kind you use to remove eye makeup) into fourths-place two of the pieces on the back of the original key fob and then place the backing of the new key fob behind it(Test all buttons and if it’s still not raised up enough, add another piece towards the bottom)-once everything works, attach the gold portion with the screw and you’re all set!Hope that helps!!

This one was for my wife she loves it very stylish 🤓

This item made the buttons on my key fob difficult to push. Also, my key fob in the case fell off the key chain. The screw that secures it must have become loosened and my key fob has been lost. I am unable to find it. I would not recommend this key fob due to the possibly of the screw loosening and losing a key fob.

I have used this without issues. I did follow one commenters instruction on removing the top face of the original fob. It worked perfectly.

I put it over my key fob and it didn’t work, but it’s so cute so I decided to figure out how to make it work. The unlock and trunk buttons worked but only if I pressed really hard, so I realized it was because the buttons on the cover weren’t reaching the key fob buttons. I decided to take apart my key fob and then decided to put just the back of the key fob (where battery is), the motherboard, and the button pad inside the key fob cover….it works perfectly, all keys function!! Just leave the face of the key fob off and this will work!!