Shaxon BM303WP3-B, 3 Port Single Gang White Keystone Wall Plate

I only had an issue with some coaxial keystones popping loose. All my RJ45 keystones fit in just fine with little effort and stayed put.

I used the 4-port and 6-port styles while installing a new home run ethernet and cable TV setup in my old house.Pros:- Thicker, more rigid plastic than a lot of the typical wall plates.- The plastic has a slightly matte finish versus that super glossy appearance of some wall plates.- Worked quite well with  Cable Matters® Cat6 RJ45 Keystone Jacks  and  Leviton 41106-RW6 Voice Grade QuickPort Connectors . The 6-port is pretty cramped but ultimately the keystone jacks all fit properly.- The white color matched fine for my tastes with those components.- Mounted quite firmly to an  Arlington LV1-10 Low Voltage Mounting Bracket . However, see cons.Cons:- It'd be nice if the plate were a touch deeper. When attached to a properly installed old-work  Arlington LV1-10 Low Voltage Mounting Bracket , there's a 1 millimeter gap between the plate and the wall.

A standard wall plate for electrical outlets, cable, etc is 4 3/4" tall. The Shaxon BM303WP4-5B wall plate is 4 1/2" tall - a full quarter-inch shorter than a standard wall plate. I replaced four cable wall plates with the Shaxon plates and it looks terrible. The person who cut the drywall holes for the cable clearly knew what size a standard wall plate is, because the holes are just the right size to be covered by a 4 3/4" tall wall plate - but the Shaxon plates don't cover the holes. The Shaxon plates that are next to electrical outlets appear way out of vertical alignment because some of the cable holes were cut a little low - but a standard plate covered it up enough that you didn't notice.I'm going to have to go buy another set of keystone wall plates now - standard-sized. Maybe the Shaxon plates are okay if you're putting them in a room with no other wall plates, but I won't be going with Shaxon in the future unless there are product dimensions on the product description page.

The product is great in general but if you have a mounting bracket that is not below flush with the surrounding drywall, it will have a gap once mounted.I'm not sure I described that correctly... so like if you have a plastic or metal low-voltage 1-gang bracket in your drywall that you're trying to mount this on, if the bracket protrudes at all you will have a tiny gap between the wall plate and your drywall.I suppose most people wouldn't care about this but I'm kinda detail-oriented.

Decent wall plate, plastic isn't quite as good feeling as the nicer ones, but once you install it, you're not going to be able to tell.Given the cost that Amazon (or its vendors) builds into the price, you're really just better off buying one locally from the hardware store if you have sucb options available. The hardware store probably has a slightly higher quality Leviton or ICC equivalent for a cheaper price (well, maybe not, if you consider whatever it costs you in gas to get there!).

Just what I was expecting

It came with screws, seems strong enough, had no issues, keystones fit. Not bad for a dollar.

Good price and works well!

Buen producto calidad-precio.Lamentablemente no acepta conectores quickport de la marca leviton, ya que las pestanas de la base de estos ultimos son demasiado grandes.

Good