myTouchSmart33861 LE One in-Wall Digital Timer, Push Door Switch, Backlit LED Screen, 8 Custom On/Off Times, Countdown Mode, Daily/Weekly Set, Off & Countdown

Tried two other timers (neither of which worked) and finally found this one. It’s perfect! Simple to install, simple to program and works flawlessly! Very happy with this product.

I used this to replace a failed timer in my LV landscape transformer. It is the same toggle style so changeover was simple. The best thing though is how easy it is to program. First thing, the door opens down so it’s not in the way while pushing buttons. Easy choices for sunset on, sunrise off or putting in a set time for either. It also has a multitude of other options which I don’t currently need.Great product!

Replaced a more complicated unit with this. I'm glad that I did.

I got this to turn our porch light on at dusk and off at dawn. A previous in-wall timer with sunrise/sunset tracking failed after several years. It was a bit of a pain to program... the rare times I wanted to reprogram it, I had to find the instructions.This switch is entirely different: once you set the current date and time and latitude zone, setting it up to turn on at sunset and off at sunrise is as simple as pressing a couple of buttons to tell it to do exactly that. Even setting the date/time is relatively logical and works as you'd probably expect if you've done similar things before.I haven't had it installed for very long, and I haven't paid close attention around sunrise/sunset so I can't say how well it tracks to the current sunrise/sunset. But there are options to add an offset to turn it on/off a little before/after so I expect that even if it's not getting it quite perfect, I can use that to adjust it.Wiring is a little different than on other switches and outlets that I've installed. It has holes that at first glance appear to be "back-stab" holes where you just push the wire in. I don't particularly like those because they're often hard to release so I tried to instead put the wire under the screw only to find that I couldn't get clearance. It turns out that the wire holes are tightened down not by an internal spring, but rather with the screw! So it's the best of both worlds: the easy wiring of just inserting the wire into the hole, then the security and easy of release afforded by the screw.

The switch appears well constructed with clear instructions. Installation was a 5 minute job since I was replacing another timer. So far, so good...

Easy to program, easy to see.

I have a pole light at the end of my walkway, and the old timer went, so I searched the internet for an easy to install digital timer to replace the old one. The result was a myTouchSmart One in-Wall Digital Timer. After taking off the wall plate and old timer, I discovered that my current setup was a plastic wall box with no visible ground. I thought, oh my, I am going to have to return it to Kohl's. Before I did, I contacted a family electrician who said that I could probably still install it without a ground. Well, that was all I needed. I proceeded to hookup the new timer, but after turning the electricity on, I did not see any power going to the timer. So, I checked the myTouchSmart website for suggestions. One user said that all he did was to switch the lead and the load wires, and his timer started working. After switching wires, I had power to my timer. But when I looked outside the pole light was still off. Having been a trouble shooter in my working career, I thought the simplest thing to try was to replace the light bulb. Sure enough, the light came on. Programming is actually pretty simple if you follow the directions, or better yet, go to YouTube for a video. The timer came in white with an ivory/almond replacement door, which I used. Also, don't forget to order a wall plate to match the color your wife wants. Finally, if you push the door, you are able to manually turn the light on or off, regardless of your chosen setting.

We had this switch installed by a professional for our front lights and works great. You can set the time for the lights to come on and off, has a day light savings setting as well. I guess if you are familiar with installing switches, this will not be hard. There are videos in youtube that can help. Would recommend this product.