Ubanner PC LED Flexible Light Strip Computer Lighting Pink with Magnetic for PC Case Computer Lighting Kit

Wether you have UV tubing or coolant, these UV strips are pretty damn good.These also look tasteful and not tacky like inaccurate RGB lighting, theres just no happy medium, if your motherboard is completely loaded with RGB lighting like my Aorus x470 gaming7 wifi motherboard then these strips are a change for the better, i do not want a christmas tree on my desk with no hope of ever getting a proper white colour i like things to be subtle and classy, this is where UV lighting is the king.Every part of my motherboard shows a different tint of white which looks absolutely horrendous, RGB lighting needs to be calibrated otherwise it looks terrible, however UV lighting never presents such problems, if you want UV white you will get it and it will look 10 times better, ive already desoldered the leds from my motherboards ram slots and removed the ram slot diffusers as they looked so tacky and un-uniformed in colour, this is what happens when you run each individual led at exactly the same voltage, green and blue leds need less power than red to achieve the same brightness, this is why pure white is impossible unless the correct resistors are fitted. Gigabyte is not immune to this issue, all motherboard makers do this, they just slap leds everywhere and expect them to just magically work properly.These strips are really nice in my Lian-Li dynamic case, one across the top and one on the front pillar, both are unseen when the glass panels are fitted, you just get the lovely glow of the UV coolant and motherboard accents (orange)I dont think sunbeam make UV cold cathodes any more so UV leds are the only option, these are only marginally dimmer than cathodes which hadnt used to be the case, up until recently they were pretty terrible in comparison but now they are actually much better. but dont fall for buying cheap UV leds from eb*y they do not work and have very low bandwidth, grab a pair of these they are 10x better, you can control the brightness from 9 to 14.2 volts DC to taste, as they are magnetic your case cools them. These are 12watts so they are extremely bright and efficient in light output. Please dont use them in a white case though or everything will light up, stick to using them in a black chassis as then you wont see any purple light at all.I always use black antec P12 12cm fans in my machines and paint the fan blades with UV reactive enamel paint, they look bloody amazing with these lights, also painted the removable heatsinks from my corsair vengeance RGB ram too. much more tasteful than the overpriced RGB tat found on eb*y, amazon are the kings in quality products and speedy delivery, no other company touches them.Do i recommend these? hell yes, theyre extremely good quality with excellent light output, theres absolutely no need to use cold cathodes any more these are better and draw much less current. these are so good actually they light up my livingroom ceiling light cover blue from 10 feet away.

Arrived on time, this is a great item as you don't need RGB on your motherboard, just a straight forward molex plus in an it's sorted, magnets are good and hold well, deffo recommend

Nice led lights make my PC light and adds interest to my build, recommended.

I bought this for my Son's PC to make it more attractive in addition to the case fans. It easily attached to the Motherboard and magnets allowed them to be positioned for the best effect. He loves them.I would recommend this product for anyone with blue case fans who are wanting some added lights for visual effect. Very easy to install.

With bits of the old case falling apart and one eye on a system rebuild in the near future, I decided to acquire a new case to transfer my old i7 self-build into. The new case had a transparent side panel and better cable management features than the old case allowed. The end result was that the view from the side panel was of a rather neat looking system -even if I do say so myself. I decided that some internal illumination would not go amiss. As the case sits on my desk (it is literally a desktop) then I did not want some garish arrangement with flashing lights, multiple colours etc as this would be quite distracting. I wanted something that would cast a steady white light, akin to what a desk lamp would provide.Fortunately, my needs were not likely to lead to anything expensive and these ubanner led strips were just what I needed.For £8.99 you get two of these. Fitting is an absolute doddle and greatly helped by the included molex connector leads and the fact that the strips are magnetic.; As a result, there's no pratting about with sticky tape (which eventually loses adhesion) as seems the case with many rival products.The strength of the magnets is such that the lighting strips hold quite firmly to the case interior. Obviously, if you have a entirely or largely plastic case (is there such a thing?) or an aluminium one, these LED strips might prove problematic and are probably not the best buy for you.Personally, I am very pleased with these strips. The prce seemed very fair and the illumination provided by these makes both a nice finishing touch to my rebuilt system and provides a useful bit of extra desk lighting. They were so easy to fit a and will be very easy to reuse/remove if I get round to a major overhaul at some point. . l.

Just don't forget that they generate a lot of heat on the back 👍

these UV led strips are amazing, i have a full atx case and the cable length is more than long enough, secondly the uv effect is so bright, for an idea of how bright please look at my picture (fans are being lit by UV only) overall first class product took less than 30 seconds to install, simple plug into a molex and your done, the led strips are magnetic so no need to worry about how to attachi noticed some has written a review for a different colour led strip and stated that there not UV as advertised, the fact is blue led strips are not advertised as UV

Not the best quality but what can you expect from them if they cost so little. They stick to the inside of your case using magnets and I haven’t had many problems with them and I’ve had them for about a month. They’re really easy to install and I would still recommend buying