*Six channels supporting data reception * NRF24L01 is a world-wide work in the 2.4-2.5GHz ISM band single-chip transceiver chip * Low application costs: NRF24L01 integrates all RF protocols associated with high-speed signal processing section, such as: automatic retransmission of lost packets and automatically generates response signals, NRF24L01 SPI interface can be used to connect the microcontroller hardware SPI port or MCU I / O port to simulate internal FIFO with a variety of high and low speed microprocessor interface, easy to use low-cost microcontroller. * Wireless transceiver comprising: a frequency generator, an enhanced set S chock Burst TM, mode controller, power amplifiers, amplifiers crystal modulator, demodulator, channel selection and output via the SPI interface protocol can be set very low current consumption * when operating the transmission power in the transmission mode is 6dBm current consumption is 9.0mA 12.3mA receiving mode is the power-down mode and standby mode current consumption mode lower. * facilitate the development: Since the link layer is fully integrated in the module, very easy to develop. Automatic C automatic detection and retransmission of lost packets retransmission time and the number of retransmissions can be software-controlled automatic storage not received response signal packets auto-answer, after receipt of a valid data, the module automatically sends a response signal, without further programming Carrier Detect - fixed frequency detection built-in hardware CRC error detection and multipoint communication address control packet transmission error counter and carrier detect function settings can be set at the same frequency hopping six-way receive channel address, selective The open standard pin Dip2.54MM receive channel spacing interfaces for embedded applications.
Trustpilot
5 days ago
1 day ago
