FONKEN Car Phone Mount, 360 Degree Rotation Dashboard Clip Mount, Compatible with iPhone 11/12 Pro Max XS Max XR 8 8Plus 7 Samsung Galaxy S10 S9 S8 LG and More

Worked for me because of all the other plastic suctions melt in the summer

I bought this to use on a 2014 Acura MDX with navigation because it doesn't have Android Auto navigation so I have to use my phone and prop it up. I don't like glass mounted suction with large phones because as the car travels, the arm that holds the phone shakes and shimmies making it difficult to read. So I bought this thinking I could attach it somewhere useful. Unfortunately, everywhere I tried to attached it (dash over center console, vanity mirror think above my head - it just blocked or was not in a usable area. I really want something I can mount towards the center of the dash so a passenger can help enter addresses for navigation.I finally decided on the dash area by the navigation screen, off to the left. It was a pretty good fit, though getting a cable plugged into my phone while it was in the cradle was someone of a challenge and I had to rotate the phone slightly off center to fit properly. I used it for about 36 hours then took the clip off of the dash. It left an imprint. Took about 10 mins but the imprint vanished. So the clip is very strong - and it has to be to hold on - that's a positive, but the Acura dash is padded somewhat, and I'd rather not deface the car to make this thing work, so I marked off one start for that, and only for that.I decided not to return it as I may have something I can use it for in the future, but for everyday use, it's a non-started for me strictly to protect the dash. It's grip was tight and perfect otherwise for holding a Google Pixel 4 (non-XL) model.

Great quality and durable. Easy to install, adjust, and fits phone.

The media could not be loaded. The unit is well constructed. The supplies Phillips "L" wrench is useless. The clamps barely open wide enough to hold my Samsung Galaxy Note S10 Ultra with an Otter Defender case on it. The clamps pads interfere with the side buttons so I have to hold it low. I tightened the screws as far as I dare but the weight of the phone causes it to turn. Maybe some detents would solve that issue.The gripper pads do not provide enough adhesion and the whole thing eventually slides off. I have it mounted on the right side of the dash on my 2020 Subaru Outback. I tried to use it on my 06 Silverado but I had recently applied ArmorAll to the dash and it is too slippery for the gripper pad. The clamp has a strong spring so be careful. It will bite you.I considered returning it but decided to keep it.

Worked really well on my 2004 RAM 2500 truck, but when I went to move it, it broke because it basically glued itself to my dash

I’ve had this for over 18 months now and finally decided I should leave some feedback. I have an iPhone 12 Pro Max in an average case and the mount is in a ‘17 RAV4 on the dash. After adjusting the pivot tightness, it was too loose for a big phone, I’ve had zero issues with this aside from wear and tear on the cushions.The grip/hold on the phone has stayed firm this whole time too, found out the hard way when I accidentally put the grips over my volume and power button. The grip on the dash is still as strong as the day I got it too.If you haven’t figured out the easy in/out trick for mounting your bigger phones, put one side into the cushions, open the rest of the way, and it should slide in. Then do the opposite to take it out, open it until you can take one side out and you’re golden.I’ve gone through a lot of different styles of phone holders, even variations of this type, for my vehicle and this is by far the best & the only one I’ve recommended to friends and family.

Flimsy would not stay on anything I clipped them on.

My former phone mount was a "Vent" type and blocked air flow, so I decided to try this. The units came quickly, are well designed and built and the unit works like a champ. Phone is held securely and swivels easily between vertical and horizontal positions. (see photos) Just be sure to pay attention to the requirements on the order page that you need some dash space and overhang so the contacts of the holder can grip. I'm using it on a 2021 Subaru Ascent and and an older RV. Very pleased with the purchase. Would definitely buy again!