Ergotron HX Triple Monitor Bow Kit Fits up to 24" (2.7-13.8kg)

This triple monitor bow allows the monitors to go up, down in or out as needed. Extremely well built and fully adjustable. I have three 24" monitors perfectly and ergonomically adjusted for sitting or standing.

I have three 24inch monitors. This is the ONLY monitor arm that's capable of doing this (with all three monitors on one arm). In case you don't know yet, you need both the arm and this bow kit to get everything to work.Firs the good:- It's very robust and everything is well built. With three 24" monitors (each weights about 7 lbs), the arm handles them with ease. I can use the handle to move the monitors easily without much wobbling (make sure you desk is made of good quality solid wood).-Polished chrome is a personal taste, which not mine. But it's what was available to me.-Installation was easy, albeit the alignment/leveling of the three monitors which I will get to later.-Cable management is good. With the MST (multi-stream transport), I ran one mini DP from computer to one of the three monitors. Then use additional shorter mDP to daisy chain all three monitors together in series. So cable management from the computer, up the arm, to the monitors was easy. Even if you don't use MST, the cavity in the arm will have no problem handling all the cables.Now the bad:-Heavy, you must have solid test to handle the load.-Very expensive. I understand the need for this type of arm is probably a lot lower than the dual monitors setup, but there is got to be a more economical solution out there. With both arm and this bow kit, it totaled over $600 including tax.The WORST:I have no problem paying the premium to get a quality product or solution. But with the premium we are paying for this solution, I would expect the leveling of three monitors to be much better and more intuitive. If you look at the pictures I have attached, you can the two monitors to the side of the center monitor is considerably lower (about 1/8"). Trust me, I have tried everything to try to get everything leveled, nothing worked. If it weren't for the 4 plastic adhesive strips that they included, it would've been worst. VERY BUMMED OUT. Wish they can fix this. If you research a bit online, you can see that everyone has this problem.BUT, like I said in the title, I would still buy it again if nothing else is available. It's the only option available. Ergotron, if you are reading this, help us out!!!!

Fit & finish seems to be nice, however there is a glaring omission that can cause one's OCD tendencies to kick in: there is no individual height adjustment for each monitor. There is a slight height mismatch between my identical monitors, due to the outer beams having a slight downward angle in relation to the center beam. I've purchased triple-monitor desk arms in the past that have this, so to me this not a flattering look for Ergotron. I've been happy with various other big-ticket ergotron products, but this is the first that has disappointed me a bit. Ergotron support basically told me that most people don't care about this, so deal with it. I'm looking into getting vesa-to-vesa lift adapters to correct this problem. If I do end up doing this, I will amend this review to reflect my experience.