WYNNS Diesel EGR System Cleaner Aerosol - Powerful Jet Spray for Deep Cleaning - Dissolves Carbon, Tar & Varnish - Restores Engine Performance & Prevents Starting Issues - 150ml

Engine management light on due to reduced flow in the egr. Used this can as directed, oh boy what a nerve racking experience. Into limp mode. Lots of active faults MAF sensors etc. But trust the process, remove fault codes on your scan tool. Test drive and clear the codes again afterwards. Worked a treat on my 16 volvo d3

Very good quality, trustable seller

good product easy to use

Used to clean MAF & MAP sensor on discovery 3 and did the trick with no effort. Highly recommended if you need a clean in these areas as cleans all the crud off with ease.

I haven't used it yet as I noticed in the instructions it recommends changing your engine oil after use. This makes sense, as if the spray removes the carbon gum off the sides of the parts, the dirty stuff is going to be floating in the oil before you change it - could easily cause wear and tear to the engine itself. As I'd just had an (expensive) oil change I decided to wait until just before the next oil change before using the spray.

used on a 2016 320D that developed a rough tickover which in turn causes issues being as it's an auto...a right pain. I had a new EGR valve fitted just a few thousand miles ago after the same issues so assumed it needed a mild clean rather than removal, (this stuff wouldn't of sorted that valve I can tell you)! Followed the instructions to the letter and it seems to have cured the problem, the tickover is now silky smooth and there is no hesitation when revving, pulling away or accelerating. I'm lucky in that it's a relatively new EGR that hasn't covered many miles so can't vouch for it working on a heavily carbonised 100,000 mile car. Just to mention it takes quite a while to complete the second stage where the remaining contents of the can need using entirely, you'll need a non whinging 'my ankles hurting' volunteer to help you as the engine needs holding at approx. 1800 revs. I could of removed the valve and cleaned it properly but for now this has saved time and appears to of done the job.

Arrived on time. Item as advertised. Recommended

Can recommend this item.