10 PACK Dust Bags for eufy Clean G35+, G40+, G40 Hybrid+ Auto-Empty Station, eufy RoboVac Replcement Bags Accessory, 4 Layer Filtration System with Activated Carbon Fabric to Remove Unwanted Odors

Ordered these for my sons robot vacuum, great fit and worked perfectly

While these feel a bit less substantial than the OEM bags, they function exactly the same in my experience.

These fit our Eufy perfectly. They are easy and convenient to use. I highly recommend these replacement bags

Good manufacturer replacements, do the job as they should.

These work perfectly for my Eufy robotic. I'll be ordering again once I run out!

Aside from slight visual differences, I noticed only one objective difference in a comparison between these bags and the stock, Eufy-branded bags: the thickness of the fabric. The stock bags weigh 57g while these weigh in at 43g; but, you don't really need a scale, as you can easily feel the thicker construction by hand. This difference aside, I let my vacuum run multiple times over a week with this bag in place, but I couldn't observe any difference in performance.This is $30 for 10, or about $3 each. The Eufy-branded ones are about $28 for 6 on Amazon, or just over $4.50 each. I do find a bit of irony in a Chinese knock-off of another Chinese company's product, but whatever. This really isn't a highly sophisticated product, and really doesn't warrant a highly sophisticated review. Meaning, the bottom line is that these are 33% cheaper and appear to be functionally identical.

These bags are of nice quality. The cardboard face-plate is perfectly rigid and inserts into the dustbin retainer easily and the sliding dust trap locks in the mess when changing the bag out. The fabric-ish bag has good air flow while effectively filtering out contaminants from the air. These bags are as good as the oem version or better.Full disclosure... I do not have an eufy vacuum, however I modified them to work with my iHome Nova Pro robot vacuum. These bags are nearly identical to what I needed, yet the cardboard face-plate is wider. The height of the face-plate and the dust inlet are in the same location, I simply have to trim each side of the cardboard face-plate to achieve the correct width so that it will insert into my dustbin retainer. A quick measurement, a straight edge ruler, and a utility knife is all you need to get a nice clean edge and have a proper fit. As stated above, these are great bags and are as good or better than the oem version.

This are a perfect replacement to the ones that came with my Vacuum. I have a G40+ and have not had any issues with this replacement. for about $3 a bag I feel this is an great value compared to others out there.