🎸 Power Your Passion with Precision!
The Truetone One Spot Multi-Plug 5 Cable allows musicians to connect and power up to five pedals simultaneously, featuring right-angle plugs for a compact setup and spring-loaded contacts for secure connections. Expand your pedalboard with linkable cables for an enhanced performance experience.
R**R
Works Great
I've been using this for years now and can highly recommend it. Even when upgraded to a proper power supply I was able to use this to add a few more pedals to the high amperage output. Great value piece of equipment that got me through my first year of building a pedal board.
M**S
Works with Danelectro and Behringer.
If you're buying this and new to effects pedals (like I was), you'll be concerned whether it'll work with the inexpensive pedals you're likely to also be buying, especially since there is a large kit with a number of converters that might scare you into thinking you'll need them. The two most common types of inexpensive pedals are Danelectro and Behringer, and if you're like me they're ll you'll buy for quite a while. The good news is, you do NOT need to buy converters for them. This little beauty will run all your Behringer and Danelectro pedals, off from any of the standard 9V power supplies available (you don't NEED to buy a 1SPOT, I use it with a Behringer but you could certainly put it together with the less-expensive Planet Wave if you're working on an even tighter budget. In short, buy this product, it will save you its cost in 9V batteries within the first two months if you're on low-price pedals.
C**S
Works Great To De-Clutter Workspace and Receptacle
Arrived on time ... works as intended and maybe more.One day, I was pondering how best to de-clutter my wall receptacles from a glut of power adapters and also my table from a spaghetti of ensuing power cords used to feed various 9V-12V DC equipment on my table or rack. Fortunately, I chanced upon this little gem and in an instant ... my problem was solved. I chose the 12V adapter with the highest rated power output and used that as my primary 12V DC source and this little gem to power all the other equipment on the table or rack. I also bought another similar unit form another source here on Amazon and used that to supply the 9V DC source to power the rest of the units that needed a 9V source. Everything worked fine and I relegated the remaining adapters to storage. Been working without a problem to this day.
C**G
Must have for a large pedal board.
Visual Sound's 1 SPOT Adapter is a must-have if you use multiple pedals and stompboxes, and the Visual Sound Multi-Plug 5 Cable is the accessory that makes it rock! This chain for your power supply can power multiple pedals, and another one of these chains may be added to it to power even more pedals! Powering all of your effects from a single adapter with this product can eliminate signal noises that sometimes accompany the use of multiple power adapters. The right-angle plugs on the Visual Sound Multi-Plug 5 Cable for 1 SPOT Adapter come in super handy, making the power cables a bit easier to manage. The price is also an excellent value, so be sure to pick up two of these with your 1 SPOT Adapter! This product will pay for itself, as you will no longer be wasting money with 9-volt batteries!show less
T**O
It is simple really
It works. You attach it to your power source (make sure it is a good one), and then you can use this to plug into your pedals.There are two reasons for "this" to potentially produce noise. If1. You have a poor power source (which many are...you have to find one good enough to power multiple pedals)or2. You got a defective cable. This can easily be fixed by getting an exchange.Personally, I limit myself to 3 pedals because I know that is the limitation of my power source. I have not and will not try more, as I do not want to risk ruining anything.So again, it works fine.
L**N
Can't go wrong with a One Spot
While rearranging my backup board, I bought this to replace the stock straight plugged version I have had a long time. I have another Visual Sound right angle 7 plug so I thought it was wise to go with this brand for my backup pedalboard. I noticed they have changed the molding on the plug ends. This new one has larger molding on the plugs, so it should hold up well. Even though the plugs are now larger, everything seems to fit well even if a little tighter on space. Those pedals that have the DC jack very close to the input or output may take some careful routing of cables, so be advised. Overall great quality as is typical of Visual Sound products. Highly recommended for One Spot users.
S**N
Just what I need for my peals.
Works great with mu Spot One 9 volt power adapter and I can use up to 5 pedals with this, I could of gotten one with 8 connections, but the more pedals you add the less reliable these become and the noisier your pedals can get from dirtier power. I use it for 4 pedals at the moment and it works great, but I'm not sure if I trust something like this for live gigs. The best part is now I don't have to get a bunch of expensive 9 volt batteries all the time anymore :).
R**Y
Almost perfect
I've had this thing for about a year. While setting up for a show I noticed the male end where you plug in the power unit didn't work!I can still use it by plugging in the power directly to the pedal. If I hadn't tried that this thing would've been garbage and luckily all connections work.
Trustpilot
1 month ago
4 days ago