Willyn Antiskid 3 Bearings Lightweight Speed MTB Racing Bike Pedals Bicycle Pedal 278g

Description

How to fit your pedals: * We recommend cleaning your crank before fitting to help remove any grit that is in the threads * Find the Right Hand pedal by looking for the R on the end of the axle * To prevent the pedal being difficult to remove in the future, put a little grease on the pedal thread. About half a pea size is all you need. * With the Right Hand pedal in your right hand, gently offer up the pedal thread to the RIGHT HAND crank thread (the side with the cogs on) and slowly pedal the crank backwards. The pedal should begin to screw into the crank. I have always done this way so you can feel any resistance and prevent cross threading. * Once tightened up by hand, tighten with an open ended 15mm spanner * Repeat with the left hand side. Due to the reverse thread on the left pedal you still pedal the crank backwards to tighten the pedal.