STORMGUARD 02SR0200914W Bottom of The Door Brush Seal Draught Excluder, White, 914mm

This product works really well to stop any draughts coming under the door. They are easy to fit and very robust. I fitted them to both exterior doors many years ago and they still work really well. I can really recommend these draught excluders.

I bought this draught excluder to cover the gap at the bottom of my bathroom door, and it has worked perfectly. No more cold drafts! When cutting to length it is advisable to use a hacksaw, as the bristles are enclosed in a metal strip. Once cut I crimped the cut end in a vice and then added a spot of superglue at both ends of the metal strip to ensure no bristles came loose. After 3 weeks not a single bristle has come out. Cutting the plastic backing to length will likely result in the supplied drill holes no longer being evenly distributed, so I drilled a few extra. The supplied 4 screws are not enough, so I added two of my own, which are needed to ensure the, rather flimsy, backing is tightly fixed to the door at both ends and along the entire length. All these modifications are simple and easy to perform and I would thoroughly recommend this product. A 10 minute install has made a noticeable difference to the warmth of my lounge, off which the bathroom lies.

Very easy to fit

easy to install pretty good draught exclusion but I don't like that I have to keep pushing the brush back into place every couple of days

Works well, have a large gap below one door this helps alot

Plenty of bristles

Fits perfectly

We have a bit of a draughty house so I bought a set of these to go on our front / back and living room doors.I'm pleased to report that they have worked exactly as intended and we no longer feel a draught.We have a baby and she has a play mat on the floor in the lounge but we were conscious of their being a draught coming into the room at floor level from the door but these have completely put a stop to that. I think it has also helped to retain some heat in the room as well.It was really easy to install using the self tapping screws, just offer up the excluder to the bottom of the door making sure the bristles are touching the floor and screw into the door. It couldn't be easier. I even had to cut one down to the right size for the door and I was able to use a regular pair of wire cutters to just snip it off (some strong scissors also work)