• The DigiCom 2 is an advanced auto-dialling digital communicator for alarm reporting. • It can transmit alarm signals to an Alarm Receiving Centre via the analogue PSTN (Public Switched Telephone Network) using the 'DTMF Fast Format' protocol. • Monitors PSTN line continuously. If a fault occurs, a message will be sent to the control panel. • Built-in Abort Function to enable older alarm systems to comply with the ACPO false alarm policy. • PC programmer • 8 alarm inputs - when triggered by the alarm system, the Digicom 2 initiates cells to the Alarm • Receiving Centre • Built-in relay for serial handset connection • Three way calling to override engaged telephone line • NVM re-usable chip. Fully compatible with the scantronic NVM chips • Comes in an ABS plastic case which protects the electronics. • Dimensions (HxWxD): 19 x 61 x 91mm • Weight: 80 grams • Telephone Path Standard PSTN technology • Abort Facility Built-in • Power Requirement Max. 13.8V Min. 9.0V DC, 0.1V max ripple • Current Consumption 6mA quiescent, 20mA operating • Low battery 10.9-11.1 volts falling, 11.9-12.1V recovery • Outputs: 1 Aux relay (24V 1A contacts) • Start Inputs: Max +15 volt, Min +3.5 volts DC • Temperature: -20°C to +60°C transit, -4°C to +5°C operating • Humidity: 0 - 80% non-condensing
Trustpilot
1 month ago
2 months ago
