Outsunny 7' x 4' Metal Lean to Garden Shed, Outdoor Storage Shed, Garden Tool House with Double Sliding Doors, 2 Air Vents for Backyard, Patio, Lawn, Light Gray

Perfect! Just what we were looking for, it’s smaller than 4x7 but I saw that when buying and it was exactly what we needed. Instructions are a little difficult and the holes do line up if you have all the pieces in the right spots. If not then they will not, we did end up switching stuff around a few times because we’d accidentally put them backwards. I didn’t expect it to be worth $700 value but for the price it’s fantastic.

Absolute trash ! WARNING- this shed is literally built on tiny little 1/4" sheet metal screws ! The manufacturer punches pilot holes so you can easily run the tiny screw in to connect panels, be extremely careful because the pilot holes are too big and the screw will strip easily ! One good gust of wind and the roof will peel like an overcooked artichoke ! ALSO- If you do end up buying it make sure you build a 4x4 platform for this to rest on, if you plan on building it on the grass or dirt, even concrete and this will blow away easily. You've been warned !

Put this shed together is really pain !! I am good on getting stuff together but this is next level. Some pre drill holes dont match. Its weak as paper so it keeps moving till u have the almost all walls together. The plan how to make it is worst than Ikea. It took us 8 hours ! 163 screws and some screws cant even make it tight. I got 7x4 and its not even close to any 4ft in or out.

Before you purchase this shed, read this entire review.First off, it took 3 of us over 5 hours to assemble this shed. Partly because the instructions were awful. We had to figure out (on our own) many assembly components of this shed. If you are mechanically inclined and are familiar with the fundamentals of constructing this type of shed, then you might not become suicidal during the assembly process. All kidding aside, the person who put these instructions together either didn't know the English language or they're completely clueless on creating instructions. A whole section of the frame was left out of the instructions. So it was trial and error. Also, this shed is very cheaply built. This was somewhat expected due to the price. Paper thin panels are hard to work with and since only 1 pair of gloves were provided, you had to supply the other person with a pair. OR ELSE YOU WILL END UP WITH A CUT.In all...I would not purchase this shed. I would spend a little more and either purchase installation, or buy a better built shed. You will thank me.

Instructions are a bit confusing and vague, but it works.

The metal was not as thin as is described in other reviews. It was appropriate for the price of the shed. It's more of a 7x3 not 7x4. I was able to assemble it myself even though instructions said 2 to 3 people. I only had one trim piece where the holes didn't line up. I did have to buy a piece to keep the doors together as they didn't line up square. Overall i recommend this shed

I hate this shed it’s smaller then I imagined, the instructions barely helped. It took 3 days to put it together. The sides are cheap metal, let’s just say if I put a ladder inside and it fell over, then I’ll have a big hole or big time dent that’s how cheap the metal is.. This shed was not worth what the charge me if I could get a refund that would be great but once I put it together I couldn’t return it so I’m stuck with this cheap shed…I am not happy with this purchase..

I finally built this shed over the weekend. It took about 5hrs by myself, with some periodic assistance from my wife to tighten some bolts and hold some pieces in place.Overall, I didn’t think it was as difficult to build as some other reviews suggested. Some of the screws don’t hold in place as tight as I’d like, but for the size and price, it’s a great value. Also, when you’re adding 6-8 screws per piece, one somewhat loose one really isn’t a big deal. Shed is very sturdy and even the doors slide pretty well. Good size but is short enough to not even poke over the fence. I ran out of some screws/washers at the end but was able to build it just fine.