ALLPOWERS SF100 Flexible Solar Panel 100W 24V / 12V IP68 Monocrystalline Solar Modules Bendable Semi-Flexible Mono Solar Panel 100 Watt for RV Roof Boat Cabin Van Uneven Surfaces

The media could not be loaded. I purchased this solar panel to charge a power station made by the same company. I mounted the panel on top of my van using a combination of adhesives that can be purchased here on Amazon. So far I have driven 3,000 miles and everything is working great.To actually get 200 watts out of a 200 watt solar panel, I think you have to have the panel at the perfect angle and be on a spaceship near the sun. Most of us on earth do not have such luxuries. At the perfect angle at the perfect time of day, I think you can get about 90% of the panel's capacity. On the roof of a vehicle (which is not the ideal angle), the max I was able to get was a little over 130w, and that was parked in my driveway on a cloudless day and 100F weather. You might be able to get more performance out of it, but bonded to the roof of a vehicle, I was not.That being said, the chest-style refrigerator I put in my van draws around 35w of power which means this panel was able to keep my battery at 100% all day long, with 130w coming in. Over night the battery would drop down with no sun coming in, but the following day the incoming wattage was enough to recharge the battery to 100%. Nothing like free electricity!I had to buy extension cables as the ones that come with this were nowhere near long enough to reach inside my vehicle, but other than that everything was pretty straight forward. The connected cables have MC4 connectors and my battery came with a MC4-to-XT60 cable and has an XT60 port on the side, so the panel plugged right in and started charging. Could not have been simpler to use and there's nothing like driving down the highway while charging your stuff!

86w out of the 100w panelupdate 4.24.2024:installed three of these on top of our ex-uhaul box truck and I'm happy with their operation. It looks like they will fully charge our completely discharged anker f1200(1.2kwh) power bank on a sunny day.I did not want to drill into or pierce the roof so I used this tape, available here on Amazon, to mount the three solar panels: EternaBond RoofSeal White 4" x50'original review:brand new panel clean no dust about noon on a spring day in a Southern state the anker f1200 power station is telling(lower right 86w in the picture attached) me it's getting 86 Watts from the xt60 port that the solar panel is connected to.the reason I chose this manufacturer is that the panel produces close to 25 volts unloaded and my xt60 port can take a Max of 30v so the higher voltage is desired from this panel. since the anker can only take 10 amps the higher voltage gives a higher wattage and faster charging.I plan to use three of these in parallel to account for dust accumulation and not perfectly sunny days.according to documentation, if I present more than 10 amps the anker f1200 will limit to the 10 amps.got this panel with a Amazon / manufacturer coupon discount and for the price of close to $100 and it producing 86 Watts I'm very pleased and will be buying two more.the panel is well made thicker than others I have gotten with better grommets so I can easily recommend this to others.

i bought two of theses and returned two due to poor communication with seller and them not knowing what they are shipping out. One order was got loss in shipping. Order replacement FREE on second order that means i already paid for. The replacement box was all beat up and opened (with no accessories pack plug in or tie down straps, no instructions book) to complete install. First lost panel showed up almost two weeks later with accessories pack inside the box. So, now i have two panels. Amazon sent me bill for second panel order because i want to keep both now. I contacted sell 4 times about accessories pack and they said they didn't have any pack (see pictures) YES they did! one came with one and one didn't hello. Very heavy panels and barely flex, they only pulled in watts of 122 max in direct sun and tracking sun in AZ. Not good enough for my test for a flex panel. So, i returned two. 10 calls to amazon to fix refunds. It took over a month to get my return both credited. I would not buy from this seller again or product.

Installed about 6 mos ago. They are a bit less flexible than I thought. They seem to be durable so far with no issues. I installed 4 panels with 2 each going to separate Renogy 40 amp solar controllers. They feed a 560 ah battery bank. I don’t tax the bank very much most days and a fairly sunny day will keep the bank topped up

I am very happy with this solar panel. It charges my Jackery 160 and Ctechi 300. Both adapters were included. I have the 60 watt panel.I read a review that said the adapters were flimsy. I think they work just fine and are not flimsy at all. They plug in firm as they should. The cord is about 2'.I put the battery under the panel which also blocks the sun being on the battery. Also happy to see it can pass through to another panel so I may just get another one.My Jackery only charges 39 watts on AC charge and this panel will charge faster than that. The Ctechi has no screen so I can't tell how it does other than it does charge it.Mine also came with alligator clips so I could charge a dead car battery.

Rated at a nominal 60 W, this panel will easily put out 45+ W into my small Jackery in broad daylight. That is expected/normal. For best results, the panel should be reoriented several times per day to keep it perpendicular to the sun's rays.This panel consists of multiple columns of cells wired in parallel. Within each column, cells are connected in series. This leads to an interesting behavior: a one-inch wide horizontal strip of shade across the entire panel will effectively cut off all output! That is not a knock against this specific product - it's just how solar panels work.The movable support leg snaps are on the weak side, but were able to keep the panel at the chosen angle.