AuxbeamXP-Ultra Series 3Inch 84W LED Pods, DRL & Turn Signal Multi Modes Amber White LED Light Bar, 9600LM Spot Flood Combo Ditch Lights Yellow Fog Light Offroad Cube Lights with Covers, Pair

If you're in the market for LED fog lights for your 5th gen Toyota 4Runner, look no further than these Auxbeam pod style fog lights. Bright, well built, and they're plug and play!BUILD QUALITY & HARDWARE:The lights themselves are made with cast aluminum and feel sturdy, heavy and seem to be well put together. There are two mounting points on each side of the light and the kit comes with mounting brackets and all necessary hardware to surface mount your lights. It also comes with a wiring kit, which I did not use. I also purchased the Tacoma/4Runner kit which came with new bezels, mounting hardware and pig-tail adapter that adapts from the Auxbeam deutsch style connector to H11. The kit comes with two lenses, one amber/yellow and one clear. Behind each lens is a soft, what feels like silicone, seal which sits in a groove in the aluminum housing. I have faith that these will remain water tight as long as the seal is installed properly in the groove when changing the lens (check the gasket and allen screws before installing). My only real gripe with these lights is the paint/powder coat is inconsistent. The cooling fins are not properly painted and there are definitely lighter areas that don't have a complete coat of paint. If you're installing these behind a grill, in a bumper, or foglight housing, its not going to be an issue.INSTALLATION/TIPSIf you are installing these on a 4Runner, be aware that there are NO INSTRUCTIONS provided by Auxbeam and there are only a few videos online to guide you through the installation process. Anyone with a little DIY knowhow can figure it out, but it would have been nice to include a quick guide, pictures, or instructions.If installing in a 4runner's factory fog light housing, remember to rotate and instal the bezel 90 degrees so that the larger part of the bezel is facing towards the center of the truck when you instal the light. You will also have a little play, like 3/16th or less, to manipulate the light and reduce gaps. Don't tighten the two screws until you're satisfied with the gap and a second pair of hands would be helpful. The passenger OEM foglight on 4runners is covered by a rear plastic shield which can be a pain to remove. Undo 3-4 clips that hold the the front foglight plastic bezel, move it out of the way a bit and undo the shield clips from the front and it will pop out the back. I am satisfied with the fitment (see pics) as I was able to get the passenger side light dead on, but struggled with the driver side. For good measure, I added clear high temp silicone to properly set the gasket in the groove before assembly and added dielectric grease to the connectors to prevent corrosion.PERFORMACEOkay so these lights exceeded my expectations. Light output has to be at least equal or greater to my retrofitted LED headlight bulbs I installed last year. I opted to install the clear lenses as I needed more visibility on rural/forrest/desert roads as opposed to inclement/dusty weather and I don't off road at night. Without any kind of diffusion, they throw light high into the trees and well out towards the sides, illuminating the side of road. It's "brute force" lighting with little light control. The included amber lenses are split with a diffuser only at the bottom and I would think that might give you a little better light control. I'm happy with this set up though as it increases night visibility exponentially. I'm satisfied with the color, they don't quite match by headlights and I would guess they are just below 6500k.CONCLUSIONIf you're looking for reasonably priced LED pod-style fog lights or you want to replace those terrible 4Runner halogen fog lights, these are a good bet. I won't speak about longevity as I've just installed them but for the price, you get a lot of light output. I'm now looking to buy another set and install them with amber lenses behind my grill, they are THAT good.

Bought these combo set with fog light mounting kit Super bright and better then competitors at this price point definitely recommend and will be buying more auxbeam is becoming a quality brand name for a unbeatable price

Fantastic. Arrived quickly, packaged very well. Incredibly easy to install without instructions. Work great, very bright.

Excellent quality!!The box itself shows how much love for the customers Auxbeam guys have. A nice welcome package.The quality of the lights is great, they are robust, well built, great finish, and the harness has top quality cables, long enough to avoid struggling, and with quality connectors too.The beam of the main light is evenly distributed, wide and potent. With the extra amber cover, they worked great in snow and fog.DLRs, ambar lights and turning lights are a plus, wich in my case i wont use because I have that covered.I would definitively buy the again!

Good quality, way brighter than stock fog lights, but the lack of instructions make the instal way harder than it has to be, you have to figure it out as you go first light took 45 minutes, second took less than 5

Bright and easy to install!

Why did you pick this product vs others?:I liked the driving light and turn signal functions. Product is well made and easy to install. I had lost one of the fog light covers and emailed the company for a replacement. Their customer service was the best I have received in years! The rep was very courteous and quickly sent me 4 replacement lenses (I only requested 2) under warranty at no charge. I highly recommend Auxbeam products to anyone who appreciates quality and excellent customer service.

Just installed these as cowl lights on my 4Runner, and they seem to be very bright at a reasonable price point. I spent significantly more on my fog lights (Diode Dynamics SS3 Pro SAE) when I first got the vehicle, but decided to be a little more "budget conscious" for these cowl lights since I wouldn't be using them ALL the time.My one concern was whether or not the color temperature would be close to the SS3 - and you can see a very slight difference when looking directly at the lights, but its not enough to bother me. These are a touch more yellow, whereas the SS3 appear just a bit more amber. From the drivers seat, the color difference is negligible.Another concern was beam pattern - I went with the combo lens because I wanted a bit more light on the shoulder of the road (gotta watch out for those Pennsylvania deer!) but also have a little more light down road. These don't particularly excel at either, but it does seem to be a good compromise.Overall, they seem to be well built, but of course time will tell. At this price point, I'm very happy with the lights. I may pick up a couple more with the flood pattern and mount them on the back of the vehicle for help setting up camp at night. Some red lenses would be a cool feature for that!