KREGKHI-Pull Cabinet Hardware Jig - for Cabinet Door Handles - Drilling Guide for Cabinet Doors - Creates Straight, Even Holes - Durable Drill Guides

Absolutely saved my sanity with all the holes I had to drill. I wish it could do larger sizes, but it got most of the job done and I could still use its center hole for the extra wide tasks. You must buy a clamp separate though, or else this product will not work well.

Easy to use. Nice and straight. I wish I'd gotten this sooner.

HIGHLY RECOMMEND.Outstanding product. I purchased it after watching a clip on You Tube about using the product. It is accurate and must have. I used it to install 61 cabinet/drawer pulls. In addition to this item, a must have item is the “Kreg KHC-PREMIUM Face Clamp”. When using this clamp, DO NOT clamp on the back guide (it will mess up the measurement). I wish the clamp was 1”-2” longer to give more clearance/flexibility while drilling. Another item to purchase, if you do not have one, a $2.00 “clear plastic ruler” to measure distances between the jig and the edges of the cabinet. Use 0.5mm pencil and not a regular/carpenter pencil when making marks. Use alcohol swabs then wipe with a damp cloth/paper towel to remove pencil marks.For the 2 large kitchen drawers, where the jig does not extend, I removed the jig’s guide and positioned the jig where I wanted it. The clamp did not reach. I drilled the 1st hole then inserted a second 3/16” bit in the drilled hole. I re-aligned the jig, held it in place with my hand while drilling the 2nd hole.I installed 61 pulls – 122 holes and all are perfect. This jig enabled me to make straight holes which is a must for installing pulls. Cheaper templates simply tell you where to drill and do not assist in the drilling process. Spending $40.00 on the jig and clamp is the best thing I have done to avoid costly mistakes.HIGHLY RECOMMEND.

I had a very difficult time seeing the numbers on the jig while lining up the numbers to the markers on my cabinets. Taking some white acrylic primer, I glazed over the numbers on the jig. After doing so, the results were fantastic! The jig is otherwise accurate and very easy to work with as well as durable.

I was able to drill holes for 18 cabinet doors and 8 drawer pulls in about 45 minutes. Definitely beats the jigs that just let you mark the hole locations. With this, you just set your depth (the measurement between the edge of the door and the holes) and width between the holes (common handle widths are marked on the jig), clamp it to the door, and drill the holes. No marking and then drilling. You'll need a 3/16" drill bit (doesn't come with). The time and frustration I saved made this well worth it. I recommend investing in the kreg 3" face clamp if you have a lot of doors to do. TIP: I set the jig on the internal side of the door and used a rag under the metal face clamp pad on the external side to prevent it from making any indentations or marks. Not really related to this tool in particular, but was useful in the process.

This is one of the best purchases I have ever made. This jig is perfect for drilling accurate holes for knobs and pulls. The adjustable spacing with click stops at common spacing, the calibrated fence and the sight window makes it fast and easy to get perfectly aligned cabinet hardware every time. The hardened steel drill bit guides keeps the holes perpendicular to the drawer or door. Perfect for both 1 hole and 2 hole hardware. Do not wast your rime with one of those cheap plastic templates. This is well worth the extra money. Once you set up the first piece of hardware, the rest are really quick and easy to duplicate. The Kreg face clamp works very well keeping the jig in place while you drill and I would recommend getting it also.

Works as you'd expect. Easy to set up and adjust. Wish it came with the clamp but just used one I had.Had all new cabinets to install hardware on and this saved me a lot of time. We had a custom island built and installed. The company that built it, installed it and put on the hardware (pulls). I offered the jig for them to use but they decided to do it the way they are used to doing it. The only crooked pulls in the kitchen are on the island.We also have a spice drawer that didn't fit our 5 inch pulls due to the way it was constructed. Had to get a 3 inch one for this one drawer. The jig is so easy to adjust. 5 mins later I had the 3 inch pull installed.

This is the first jig I have used on cabinets. It was simple to figure out and because of the solid design gave me confidence I was drilling accurate holes which was very important to me.