Style:C31 | Color:Black The Commander C31 TG a RGB features an enlarged tempered glass side panel, pre-installed two 200mm 5V a RGB front fans and ONE 120mm standard rear fan for optimal system ventilation. The 200mm 5V a RGB front fans deliver 16. 8 million-color RGB illumination and sync with RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The Commander C31 comes equipped with GPU mounting, advanced cable management and the flexibility for high-end components. P/N: ca-1n2-00m1wn-00type: middle tower dimension (H x W x D): 462 x 233 x 531 mm/ (18. 2 x 9. 2 x 21 inch)net weight: 7. 84 kg/ 17. 3 beside panel: 4mm tempered glass x1material: schooling system rear (exhaust): 120 x 120 x 25 mm fan, (1000Rpm, 16 dba)front (intake): 200 x 200 x 30 mm A RGB fan x2, (800Rpm, 29. 2 dba)drive bays3 x 3. 5“ or 2. 5” (HDD bracket); 2 x 2. 5” (HDD bracket)expansion slots: 7 + Motherboard: 6. 7” x 6. 7” (Mini its), 9. 6” x 9. 6” (Micro ATX), 12” x 9. 6” (tax)icon ports: USB 3. 0 x 2, HD Audio x 1, RGB switch x 1psu: standard PS2 PSU (optional)fan support front: 3 x 120mm, 2 x 140mm, 2 x 200mmtop: 2 x 120mm, 2 x 140mmrear: 1 x 120mmradiator support front: 1 x 360mm, 1 x 280mmtop: 1 x 240mm, 1 x 280mmrear: 1 x 120mm clearance cpu cooler height limitation: 180mmpsu length limitation: 200mm vagal length limitation: 310mm (with reservoir)/ 410mm (without reservoir)vagal width limitation (vertically): 45mmvga height limitation: 110mmram height limitation: 35mm (with 140mm radiator series)/ 50mm (with 120mm radiator series)3 Years
A**M
Great case for medium size install
I got this case after my old one did not support a AIO cooler. Case has enough cable slots to pull cables through back panel. Contains Shroud to hide PSU. Magnetic mesh on top of case for easier cleaning.Two little flaws: RGB controller built in has flimsy connectors but can be easily fixed with superglue.It takes some wiggeling to get GPU into place especially if you have larger one like RTX 2070 or 2080. I personally like the GPU riser better.Although I got two different kinds of screws and it clearly states that large ones are for motherboard, only the smaller screws worked. There were sufficient numbers supplied.
A**E
The picture doesn't do it justice
At first, I wasn't sure about this product. I bought it for functionnality (Cable management, hidden hard drives and vertical GPU). But what I received is an amazing and beautiful tower. It's sturdy, it's beautiful and the cable management solutions are way better than I expected. The RGB hub cames with extensions cables, which was amazing, I didn't expect that. The front fans are great quality and provides a great airflow. I am very glad of this product. 10/10 would buy again if I needed to build another tower.
R**.
It is in part flimsy and poor assembly ethos
I found the case esp the rear metalwork very thin and flimsy. Screws were thumb type - 3 of them to hold the vertical GPU... it appeared the cover plate was designed to allow the two thumb screws to be released without the cover plate but no way... not on this example anyway. The screws holding the supplied vertical GPU mount were very tight on one and the other just turned as I suspect a hole it drilled and a screw is just screwed in and it kind of cuts a thread. Seems this was either too big a hole or the screw was over tightened and stripped whatever thread it had cut. The screws also seemed to impact the installation of the PSU. In order to remount the gpu mount I had to find a slightly thicker screw. The front has two ARGB 200mm fans. Both lit up but only one spun. I swapped the connections on the built in controller but no joy. I contacted Thermaltake via email, and was told to take the fan out and send it to them with payment for the replacement that will be refunded when they get the defective fan. This is a new case and removing the front cover may cause damage as could unscrewing the fan. The issue could also be the controller as the board did not recognise it when TT RGB Plus Thermaltake software was installed so... strip that out too? I feel there is just too many variables as well as loss or damage in transit that could potentially lead to warranty refusal with this case. I hope it is just a one off "Friday" case... I really like the design, the compactness yet the ability to install a 240mm AIO and get really good cooling. Liked, and this was a deciding factor, that it had vertical GPU mounting option. Great design... little more attention to materials and build quality please Thermaltake.
D**S
MUCHO CUIDADO CON EL PANEL DE VIDRIO. Revisen antes de tratar de usarlo que no venga roto.
El gabinete es hermoso. Desgraciadamente en mi caso el panel de vidrio venía completamente roto por un accidente de la paquetería, por lo que era básicamente imposible de usar. Ya encargué el reemplazo. El servicio de Amazon fue muy atento conmigo y me ayudaron en todo. Espero no me vuelva a pasar :(Dejando de lado ese incidente, dejo mis 5 estrellas porque lo que pude ver del gabinete en el casi nulo tiempo que lo tuve me agradó. Es completamente metálico, se ve fácil de armar y la cantidad de espacio que tiene en el panel trasero para cables es un sueño. El manejo de cables se ve que va a ser excelente.
J**E
Came as expected
The product came pre-built no complaints in that regard. After completing my build and turning it on I noticed the front bottom fans led wasn't working properly, when i closely examined my plugs and wiring i found that a loose wire on the rgb panel in and on the back of the case was the cause. I was able to push in and fasten the loose wire. Now working properly and 100% as displayed in advertising pictures.
Trustpilot
2 weeks ago
1 month ago