JonsboD31 MESH SC Black Micro ATX PC Case with Screen, M-ATX/ITX Motherboard/Support RTX 4090(335-400mm) GPU 360/280AIO,Power ATX/SFX: 100mm-220mm Multiple Tool-Free Design Computer case

I purchased this for my daughter's PC to alleviate high temp problems and for the front LCD screen.The case arrived very quickly and packaged very well to ensure safe transport.Setup of the components was very straightforward and a pleasant process. I did not need to modify anything in order to get everything working from first boot. My daughter's PC is a 14700k with a MATX mobo, a 3080ti, and a 240mm AIO. This case can fit a 360mm AIO if you wanted.The screen is connected to your GPU via HDMI (it comes with the case) that has a cutout to come out of the back of the case and is plugged into your GPU. The display is powered by a USB port which also comes out of the port and plugs into the back of your motherboard. If you do not have an extra HDMI port available on your GPU you will need a HDMI to displayport adapter (found on Amazon). The screen amazingly has GSYNC/FreeSync compatibility (60hz). If you don't want to use the screen on the front of the case, it also comes with an aluminum front cover that looks nice.Coming from a SFF case with poor airflow this case lowered the CPU temps by 15 degrees which is significant. The case allows 3 fans on the bottom for intake, 3 fans on the top for exhaust, 1 fan on the back for exhaust, and 1 fan on the front for intake. Because there are so many fans you can run them on low and still achieve excellent cooling performance while keeping the PC near silent.I like the simple design, easy setup/installation, cool temps, and great looking screen. I would definitely recommend this case to others for the exceptional value.

Do not use a Lian Li edge style PSU, a normal atx or SSF psu is great. I only wish cable management is easier, but i suppose that's not a small case's fault. Having shorter power cables is helpful. Very easy to assemble and work in. Fits a 360 radiator. Smallish, so it runs a bit warmer than a full mid case naturally. I do like the screen in front. Acts as an extra monitor.

This case is a very good looking design with a lot of features. The monitor is more of a novelty that I would say I don't personally use a lot but it's a cool feature to have. The mesh panels on the front and top allow a lot of air to keep parts cool and there is plenty of room for most gpus. I currently have a 3 fan RTX 3080 in this case and a 280mm AIO. The power supply is an 850W and I ran into a space issue with the front fan (120mm) mounting just because the size of the power supply. The psu cage is adjustable with about 4 different spots but if you want a fan in the front then the highest psu spot just barely fits to allow a fan. Also for spacing, there is very little room for any cable management on the back side on the case so I wouldn't recommend running an rgb hub.Ultimately, this is a great case. Definitely pleased with Jonsbo and the product they have so far!

I took a chance on this case and was very happy with it! All of the exterior panels, including the front and top, can be easily removed with no tools. The screen will refuse to work unless you send it 800x1280 - so video sources like cheaper USB to HDMI dongles may not support the needed mode. The screen has controls on the side, as well as a power button to turn it off as desired. I used an adapter to get USB 3.0 from the motherboard header to power the screen and run the USB->HDMI converter. Rainmeter provides some fun free options to use the screen as shown in my pics.Build quality:The build quality is surprisingly good. Everything pops on and off in a crisp, satisfying way. Nothing about it feels cheap or flimsy. The panels are very easy to remove and assemble in an intuitive way.Cable management:There are holes located throughout to pass cables from the main compartment to the "basement" behind the motherboard. In this area there are a bunch of eyelets to thread cable ties through to keep everything tidy. There's also a nice internal trim panel to hide the nest of cables that comes out of the power supply. The case also includes a cable from the back of the PC to the power supply, which is convenient.

AKA: The Micro-ATX Marvel With Airflow for Days and Looks That SlapYou know how rare it is to find a case that:Looks minimalist and clean without being boring?Has actual mesh airflow that doesn’t choke your fans?Doesn’t feel like it’s going to warp the first time you mount a GPU?Yeah. The JONSBO D31 MESH SC nailed it. And I liked it so much, I picked up a second one—because when a case just works, you stop experimenting and start building.The layout is tight but intentional—everything fits where it should, no cable management rage quits, and the airflow path is dialed. I’ve got one build running a Ryzen 5 5600 with a 240 AIO top-mounted, and the second with a full air tower cooler and a 3060 Ti—both run cool and whisper quiet.What I Love:Full front mesh = unrestricted airflow and dust filtering without killing the lookCompact micro-ATX footprint but still fits full GPUs and AIOs—yes, even 2.5–3 slot cardsSide window is clear and clean, not tinted black like you're hiding somethingPSU shroud is clean and smart, giving you that cable-free look even if you didn’t try that hard 😅Great white finish—not that cheap glossy stuff; it’s clean and modernWhat Could Be Better:The included fans are basic—not terrible, but you’ll want to upgrade if you care about acoustics or ARGBClearances are tight if you're trying to squeeze in a thick radiator and tall RAM—measure firstFront panel I/O could use a USB-C, but not a dealbreaker for meTL;DR:The JONSBO D31 MESH SC is hands-down one of the best airflow-first, aesthetic-friendly micro-ATX cases on the market. It’s clean, compact, and just makes sense. If you want a case that won’t fight your parts or your build process—and still looks sleek on your desk—this is it.You bought two? Smart. I’d do the same.