PAGOW Upgraded Large Slotted Hurricane Wingnut Driver - Wing Nut Drill Bit Socket Tool, 1/4" Hex Shank for Panel Wing Nuts, Screws Eye C Hook & Q-Hanger, Steel

Wrong size slot. Amazon marketed it to go with a drill in anchor set for a at home play ground set just purchased. The steel stock diameter is larger than the slot in the drive purchased! hopefully I can grind the slop out to a larger size so it can be used. If not I have wasted my money.

If you, like me, are buying this for the installation of the associates ground anchors, don't. It's too small in the slot. You'll need a grinder to make it work.

Not much to say served it’s purpose

What a great concept! However they wouldn’t work to install the screw eyes in my wood patio ceiling. The screw eyes wouldn’t fit —either too big or too small —so the tool wouldn’t hold them steady. I tried wedging cardboard next to the screw eyes but that didn’t work either. Great concept just didn’t work for what I needed.

SO EASY.

Good quality tool. A little small for my ground anchors so used side grinder to enlarge the opening. Worked fine after that.

Originally they sent me the smaller .5" more commonly available sized wingnut driver (package improperly labeled) which definitely does not fit the tab-eared style of screw drives often used on small camping trailers, but this larger .7" size fits perfectly, is well-built and appears strong, and makes for easy operation of my trailer stabilizer jacks. The 1/4" quick connect to my drill is just what I was looking for.

Intended use: Attaching and removing wing nuts securing hurricane panels as window protection. Absolutely successful. Anyone with multi-panel window screens (plexiglass or aluminum) to put put (before) and take down (after) hurricanes MUST have these. They change a 5 hour job into a 30 minute job.