FLYCLE 2 inch Rear Lift Blocks for Tacoma/Tundra, 2" Rear Leveling Kit Compatible with 1995-2024 Tacoma,2000-2024 Tundra

Super simple to install. Use a jack to lift lower arm to get upper arm ball joint reattached. Love the new look and love that everything is black.

Bought these for my bestfriend for his truck and they were easy to install and definitely worth the money.

easy to install

Is Genial

My truck came to me with a 3" front "leveling kit," but nothing in the rear, so it needed some rear lift to even things out. I got this rear blocks kit installed in a couple of hours, and the first half of that was just figuring out how to block and position my jackstands and jack (which were both far too short for the job- *not* recommended). I kept it VERY simple, doing one side at a time. Only tool used was an impact wrench and sockets.My steps were:1. lift one tire a couple inches off the ground2. put jackstand under leaf spring forward of axle, allow weight to rest on stand3. remove tire so axle can drop enough to clear block4. remove old u-bolts and nuts5. lower axle until block fits between axle and spring6. raise axle into place and re-install tire because it always sketches me out having trucks on stands without a wheel to catch it if it slips off.7. install new ubolts and nuts, torque wellI didn't follow the steps some recommend of disconnecting the shocks and brakeline brackets, so that certainly shortened the process. I'm sure there's a good reason people do that though, so don't take any of this as gospel. When I pressed the axle back up the pin on the block didn't fit right into the holes in the springs, but I was able to get them to pop in just by turning the tire a little bit (parking brake engaged).

So far so good, easy to install however I had to grind down the old bolts to get a proper fit. Took about 2.5 hours however I had a full garage with a truck lift.

Love the way the car looks

Saved a ton of money by purchasing these here on Amazon and got the exact same out come! Looks so good on my 5th gen!

Muy completo, facil de instalar y luce muy bien

Needed grinding on the pin to fit in a tundra axle.

As someone who works with aluminum as a welderThis is quality billet and does as described

Product is good and looks great on the truck and was Delivered on time. It would have been nice to have directions or a schematic on which position and side the blocks go on. Nothing that I could figure out with a little research.

I have nothing bad to say about this leveling kit. It looks fantastic, and rides just as expected. I regained some of the lost approach angle clearance since installing the bush bar, and it simply looks amazing.