𝗨𝗣𝗚𝗥𝗔𝗗𝗘𝗗 383EER3001G 383EER3001J 4901ER2003A Washer Shock Absorber for LG Washing Machine -3 PACK -10 Years Wa-rranty Replace 383EER3001V,383EER3001F,383EER3001H,383EER3001S by TOMOON

2nd replacement set in 11 years. Did the door seal with this change out. Figure on about a 5 year lifespan for these. You'll either notice noisy spin or slower spin cycle as a hint it's time. Can be done by the average home handyman or mechanic. Good quality and fixed our washer right up. Look to YT for videos on how to. You might consider the door gasket at the same time. Our was cleaned often but there are still areas that get and stay gross!

These worked great. However you are going to most likely going to need a pair of Channel Lock Pliers to install them. If you have the pliers it will only take a few minutes to I still them. This solved the problem of the washer rocking like crazy during the spin cycle.

Washer shocks went out causing the tub to bang around. Purchased these replacement shocks for a reasonable value. Installation value was pretty straightforward and all the parts fit correctly. Only downside was that the installation recommended that the pins be lubricated with grease prior to installation. No grease was included and as much stuff that I have in the garage, I did not have any grease. So off the home store I went. Now I have plenty. I felt that the supplier should have had a small tube of grease in the package if that is what was required. not a huge deal but really would have made this perfect.

Installed these in place of the 2007 original shocks. Two fronts were still good, but the back one was bad. These seem well made, and the washer is no longer walking forward during a fast spin cycle. Easy to change and lots of how-to videos on YouTube.

satisfied

I bought these to replace the original 16 year old shocks on my LG washer. These are not as substantial as the originals but I’m only looking to get a few more months out of my lg WM2050CW (what a work horse). I wouldn’t have replaced them but my drain pump was failing and I figured I’d take care of the shocks too. The front two originals were shot but the rear was ok. After replacing the drain pump and all 3 shocks the machine is running like new. I’d recommend replacing the shocks from underneath, nothing to take apart and only took 20 minutes. I gave these shocks 3 stars based on overall structural appearance assuming they will not perform as long as the originals. Shipping was fast, shocks came complete with mounting pins and fit perfectly.

I've had my washing machine for about 15 years and never replaced the shock absorbers. I had to replace the Hall sensor on the washing machine and I noticed the OEM shocks leaked out all their grease. I also noticed that the washing machine was wobbling when it was running. So I looked into replacements and found these. These shock absorbers are NOT LG OEM shock absorbers. The reviews I read said it wasn't worth getting OEM because they don't seem to last longer than the cheaper ones, so I decided to try these first. I can't say how long these shocks last but my washing machine spins quieter and doesn't wobble like it did with the old shocks. Some quick tips on changing these: use a 1/2" or 12 mm deep socket or box wrench to press the tab to be able to pull out the "spike" that holds the shocks in place, I found it easier to tip my washing machining back and work from under the washing machine to replace the shocks (I didn't want to take things apart to get access).

Worked very well on our LG. The washer was walking on the floor during the spin cycle with more vibration than normal. I replaced the rear spider first (which was fractured) and it helped, but not as much as I expected. I installed these and the washer is smooth and stays in place.

It’s shock absorbers with good quality look exactly the original one I already installed them now it’s under test and I will update if there is any trouble. Fit on my WM LG F1260RD Update:- It’s not like original not even close . it’s to rough and hard .It cause more vibration also the bolts got out ( weak bolts) I used the old bolts that came with my washing machine. I don’t recommend it.

Llegaron rápido y hasta amortiguan muy bien. Recomendados

Feels low quality but performs high quality. Fixed the banging in our washer and was an easy fix with perfect fitment.

exelente

Fixed the shakes in our LG washer